config.ini #1

# PVCS to Perforce Converter Configuration File.
#
# Keywords in this file must start at the left column and end with a colon.
# Values must be on the same line as the keyword or on subsequent lines
# starting with a tab.

# root of tree of archives to be converted
# root: \\server\vmarchives\archives
root: J:\PVCS-Projecte\WinSPS

# Projects underneath root.
# More than one allowed if seperated by "|", e.g. (Note no spaces after "|")
# projects: /proj1|/proj2
projects: 

# Perforce Environment settings
p4port: 3333
p4user: sknop
p4client: pvcs

# PVCS login info - required for PCLI usage
pvcs_user: roeckerju
pvcs_passwd: 

# Depot to import into e.g. //ourdepot specified as
# depot: ourdepot
depot: import

# Depot root to use (defaults to main)
# depot_root: import/proj with depot: ourdepot => //ourdepot/import/proj/...
depot_root: pvcs

# Files or folders to be excluded (comment out if not used)
# Multiple files or folders can be excluded if seperated by '|'.
# Notes:
# - pattern matching is used at the start of the string, so "/Proj1/folder1/" will match
#   anything from that folder downwards.
# - "/Proj1/folder" will match "/Proj1/folder1" and "/Proj1/folder2" etc (so be careful!!)
# - special reg exp characters are turned off in the match string (quotemeta is used) so don't use *
#   etc and expect it to work.
# exclude: /Proj1/Some folder/|/Proj2/some other folder/file

# name to give directory in Perforce holding PVCS trunk revisions
trunk_dir: main

# whether to ignore branches in PVCS (treat all revisions as if they are
# "on the trunk") - you may want to set this to "yes" if most branches
# in PVCS are not labelled and/or you don't want to keep this information
ignore_branches: no

# element of depot filename to put branch name.  Must be either 0, 1 or 2
# If 0: pvcs_root/foo/bar rev 1.0                  -> //depot/foo/bar
#       pvcs_root/foo/bar rev 1.0.1.0 labelled X   -> //depot/foo/bar
#       pvcs_root/foo/bar rev 1.0.2.0 unlabelled   -> //depot/foo/bar
# If 1: pvcs_root/foo/bar rev 1.0                  -> //depot/T/foo/bar
#       pvcs_root/foo/bar rev 1.0.1.0 labelled X   -> //depot/X/foo/bar
#       pvcs_root/foo/bar rev 1.0.2.0 unlabelled   -> //depot/Y/foo/bar
# If 2: pvcs_root/foo/bar rev 1.0                  -> //depot/foo/T/bar
#       pvcs_root/foo/bar rev 1.0.1.0 labelled X   -> //depot/foo/X/bar
#       pvcs_root/foo/bar rev 1.0.2.0 unlabelled   -> //depot/foo/Y/bar
# where T is the value of "trunk_dir" (set above)
#       X is the PVCS floating label
#   and Y is the value of "branch_prefix" (set below) plus a unique integer
#
# Note that if "ignore_branches" is set to yes then the above table should
# be changed to show T in place of X and Y (i.e. everything is on the trunk)
# If "ignore_branches" is set to no then branch_level 0 is not allowed.
#
# The default is 1.
# branch_level 2 may be useful if you have a number of projects which are
# independently released.  In this case you should not have any archive files
# in your pvcs root directory; there should only be directories
# branch_level 0 is in general not recommended since you should have some
# directory component indicating branching
branch_level: 2

# prefix of name to give to unlabeled branches
# (not relevant if branch_level set to 0)
branch_prefix: dead

# time interval (in seconds) between two checkins which can be considered
# part of the same change
time_interval: 600

# - whether to convert all filenames to lowercase.  The default is no.
lowercase_filenames: no

# - whether to convert all paths (excluding filename) to lowercase.  Note
# that branch names are not lowercased.  The default is no.
lowercase_pathnames: no

# - whether to convert all branch names to lowercase.  The default is no.
lowercase_branchnames: no

# - whether to convert all user names to lowercase.  The default is no.
lowercase_usernames: no

# Whether to convert all extensions to lowercase
lowercase_extensions: yes

# - whether to list all files in the tree rooted at pvcs_root, regardless
# of whether the filename ends in .??v (where ? is a one character wildcard).
# You only want to set this to yes if you have archives with filenames
# that do not end in .??v (although it doesn't hurt setting it to yes if your
# archive directories are clean and only contain archives!).  The default is no.
list_all_files: no

# - regular expression specifying labels which indicate a (branch of a) file
# is to be deleted.  The regex is case sensitive.  Recall that regex's in Perl
# (and grep and awk..) are different than filename wildcards.
# If you're not sure about this or you don't have a consistent way of
# marking branches as being deleted, just leave the line commented out.
#delete_label_regex: DELETE.*

# Prefix to prepend to labels - makes importing nicer and avoids name conflicts
label_prefix: 

# - debugging level - set to zero to speed things up, > 0 to track down
# problems
debug_level: 1

# - regular expression specifying which files are archive files.
# As above, remember that regex's in Perl are different than filename wildcards.
# By default the converter grabs all files ending in ".??v", where ? can be any
# character except ".", and "v" can be either upper or lower case.
arc_file_regex: -arc$

# - filename "extensions" which signify various file types - these overrule
# the default determination of file type based on the PVCS GenerateDelta
# and ExpandKeywords attributes in the archive file.  The file extensions
# are taken to be case insensitive.
# THESE ARE JUST SENSIBLE DEFAULT VALUES.  It's up to you whether you want
# (e.g.) C source files (.c) to have keyword expansion or not.  If not,
# they should be of type text, otherwise of type ktext.

type_binary: exe obj doc xls bin dms lha lzh pdf zip gz tar jar ear wav au snd
	jpg gif png tif tiff dll lib pdb ini
type_text: ps eps pm env properties mdl sql paramdesc jpr jpx
type_ktext: c h cc cpp html xml css
type_xtext: pl sh csh

# Whether to do a verify or not
perform_verify=no