p4dctlerr.cpp #2

/*******************************************************************************
* Copyright (c) 2007, Perforce Software, Inc.  All rights reserved.
* 
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* 
* 1.  Redistributions of source code must retain the above copyright
*     notice, this list of conditions and the following disclaimer.
* 
* 2.  Redistributions in binary form must reproduce the above copyright
*     notice, this list of conditions and the following disclaimer in the
*     documentation and/or other materials provided with the distribution.
* 
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL PERFORCE 
* SOFTWARE, INC. BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR 
* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF 
* THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH 
* DAMAGE.
*******************************************************************************/

/*
 * p4dctlerr.cc - definitions of errors for p4dctl
 */

# include <stdhdrs.h>
# include <error.h>
# include <errornum.h>
# include <strbuf.h>
# include "p4dctlerr.h"

//
// Error numbers are allocated like this:
//
//     Fatal Errors: 	001 - 200
//     Failed Errors: 	201 - 400
//     Warnings: 	401 - 600
//     Info messages: 	601 - 800
//     Empty messages: 	801 - 1000
//
// Maximum is 1023 as 10 bits are allocated.
//


// Fatal errors


// Failed command errors
ErrorId CtlErr::BadCommand = { ErrorOf( ES_SERVER, 201, E_FAILED, EV_USAGE, 1), "Unrecognised command: %cmd%." };
ErrorId CtlErr::MissingRequiredParm = { ErrorOf( ES_SERVER, 202, E_FAILED, EV_USAGE, 3), "Configuration for %name% %type% is missing required parameter %parm%." };
ErrorId CtlErr::ServerAccessDenied = { ErrorOf( ES_SERVER, 203, E_FAILED, EV_USAGE, 3), "Access to %type% %name% owned by %user% denied." };
ErrorId CtlErr::NoRootServers = { ErrorOf( ES_SERVER, 204, E_FAILED, EV_USAGE, 0), "Servers owned by root are not permitted." };
ErrorId CtlErr::ConfigParseError = { ErrorOf( ES_SERVER, 205, E_FAILED, EV_USAGE, 2), "Syntax error in %configFile% at line %lineNo%." };
ErrorId CtlErr::NoServersConfigured = { ErrorOf( ES_SERVER, 206, E_FAILED, EV_USAGE, 0), "No servers configured." };
ErrorId CtlErr::ChildKilled = { ErrorOf( ES_SERVER, 207, E_FAILED, EV_FAULT, 2), "Child process %pid% exited on signal %signal%." };
ErrorId CtlErr::ChildFailed = { ErrorOf( ES_SERVER, 208, E_FAILED, EV_FAULT, 2), "'%cmd%' exited with status %status%." };
ErrorId CtlErr::ChildExecFail = { ErrorOf( ES_SERVER, 209, E_FAILED, EV_CONFIG, 1), "Failed to exec() %prog%." };
ErrorId CtlErr::SomeFailedStops = { ErrorOf( ES_SERVER, 210, E_FAILED, EV_FAULT, 0), "Not all servers stopped successfully." };
ErrorId CtlErr::SomeFailedStarts = { ErrorOf( ES_SERVER, 211, E_FAILED, EV_FAULT, 0), "Not all servers started successfully." };
ErrorId CtlErr::UnsafeConfig = { ErrorOf( ES_SERVER, 212, E_FAILED, EV_USAGE, 0), "Not safe to use configuration file or pid location from command line\n"
   "\twhen running as root." };
ErrorId CtlErr::CheckpointFail = { ErrorOf( ES_SERVER, 213, E_FAILED, EV_FAULT, 1), "Checkpointing %name% server failed. This needs investigation!" };
ErrorId CtlErr::RotateFail = { ErrorOf( ES_SERVER, 214, E_FAILED, EV_FAULT, 1), "Journal rotation for %name% server failed. This needs investigation!" };

// Warnings
ErrorId CtlErr::SkippedServer = { ErrorOf( ES_SERVER, 401, E_WARN, EV_USAGE, 3), "Skipped %name% %type% owned by %owner%." };
ErrorId CtlErr::ServerNotRunning = { ErrorOf( ES_SERVER, 402, E_WARN, EV_USAGE, 2), "%name% %type% not running." };
ErrorId CtlErr::AlreadyRunning = { ErrorOf( ES_SERVER, 403, E_WARN, EV_USAGE, 2), "%name% %type% already running." };



// Informational messages

ErrorId CtlErr::StartedServer = { ErrorOf( ES_SERVER, 601, E_INFO, EV_USAGE, 2), "Started %name% %type%." };
ErrorId CtlErr::StartedServers = { ErrorOf( ES_SERVER, 602, E_INFO, EV_USAGE, 1), "Started %count% servers." };
ErrorId CtlErr::StoppedServer = { ErrorOf( ES_SERVER, 603, E_INFO, EV_USAGE, 2), "Stopped %name% %type% server." };
ErrorId CtlErr::StoppedServers = { ErrorOf( ES_SERVER, 604, E_INFO, EV_USAGE, 1), "Stopped %count% servers." };
ErrorId CtlErr::ServerRunning = { ErrorOf( ES_SERVER, 605, E_INFO, EV_USAGE, 2), "%name% %type% is running." };
ErrorId CtlErr::KillingServer = { ErrorOf( ES_SERVER, 606, E_INFO, EV_USAGE, 2), "Failed to stop %name% %type% using 'p4 admin stop'. Trying a SIGTERM..." };
ErrorId CtlErr::Checkpointing = { ErrorOf( ES_SERVER, 607, E_INFO, EV_USAGE, 1), "Checkpointing %name% server..." };
ErrorId CtlErr::JnlRotate = { ErrorOf( ES_SERVER, 608, E_INFO, EV_USAGE, 1), "Rotating journal for %name% server..." };

ErrorId CtlErr::UsageMain = { ErrorOf( ES_SERVER, 650, E_INFO, EV_USAGE, 0), 
"\n"
"Usage: p4dctl [global flags] <cmd> [flags] [server name]\n"
"\n"
"Global Flags\n"
"------------\n"
"\n"
"-c <cfg_file>        - Path to configuration file. Defaults to /etc/p4d.conf\n"
"-p <pid_dir>         - Path to pid file directory. Defaults to /var/run\n"
"-q                   - Send output to syslog instead of stdout/stderr\n"
"-v <level>           - Set debug level to <level> (1-9)\n"
"-V                   - Print version and exit\n"
"\n"
"Commands\n"
"--------\n"
"\n"
"start                - Start the specified server(s)\n"
"stop                 - Stop the specified server(s)\n"
"restart              - Restart the specified server(s)\n"
"status               - Check the status of the specified server(s)\n"
"checkpoint           - Checkpoint the specified p4d server(s)\n"
"journal              - Rotate p4d server(s) journal file\n"
"dump                 - Dumps environment of the specified server(s)\n"
"\n"
};

ErrorId CtlErr::UsageStart = { ErrorOf( ES_SERVER, 651, E_INFO, EV_USAGE, 0), 
"\n"
"Usage: p4dctl start [-t <type>] <server name>\n"
"       p4dctl start [-t <type>] -a\n"
"\n"
"Without the -a flag, starts a specific server; with the -a flag, starts\n"
"all configured servers that the running user has permission to start.\n"
"\n"
"If the -t flag is specified, then only servers of the specified type\n"
"will be started.\n"
"\n"
};

ErrorId CtlErr::UsageStop = { ErrorOf( ES_SERVER, 652, E_INFO, EV_USAGE, 0), 
"\n"
"Usage: p4dctl stop [-t <type>] <server name>\n"
"       p4dctl stop [-t <type>] -a\n"
"\n"
"Without the -a flag, stops a specific server; with the -a flag, stops\n"
"all configured servers that the running user has permission to stop.\n"
"\n"
"If the -t flag is specified, then only servers of the specified type\n"
"will be stopped.\n"
"\n"
};

ErrorId CtlErr::UsageRestart = { ErrorOf( ES_SERVER, 653, E_INFO, EV_USAGE, 0), 
"\n"
"Usage: p4dctl restart [-t <type>] <server name>\n"
"       p4dctl restart [-t <type>] -a\n"
"\n"
"Without the -a flag, restarts a specific server; with the -a flag, restarts\n"
"all configured servers that the running user has permission to restart.\n"
"\n"
"If the -t flag is specified, then only servers of the specified type\n"
"will be restarted.\n"
"\n"
};

ErrorId CtlErr::UsageStatus = { ErrorOf( ES_SERVER, 654, E_INFO, EV_USAGE, 0), 
"\n"
"Usage: p4dctl status [-t <type>] <server name>\n"
"       p4dctl status [-t <type>] -a\n"
"\n"
"Without the -a flag, checks a specific server; with the -a flag, checks\n"
"all configured servers that the running user has permission to check.\n"
"\n"
"If the -t flag is specified, then only servers of the specified type\n"
"will be checked.\n"
"\n"
};

ErrorId CtlErr::UsageCheckpoint = { ErrorOf( ES_SERVER, 655, E_INFO, EV_USAGE, 0), 
"\n"
"Usage: p4dctl checkpoint <server name>\n"
"       p4dctl checkpoint -a\n"
"\n"
"Without the -a flag, checkpoints a specific p4d server; with the -a flag,\n"
"checkpoints all configured p4d servers that the running user has permission\n"
"to checkpoint.\n"
"\n"

};

ErrorId CtlErr::UsageJournal = { ErrorOf( ES_SERVER, 656, E_INFO, EV_USAGE, 0), 
"\n"
"Usage: p4dctl journal <server name>\n"
"       p4dctl journal -a\n"
"\n"
"Without the -a flag, rotates the journal of a specific p4d server; with the\n"
"-a flag, rotates the journals of all configured p4d servers that the running\n"
"user has permission to administer.\n"
"\n"

};

ErrorId CtlErr::UsageDump = { ErrorOf( ES_SERVER, 657, E_INFO, EV_USAGE, 0), 
"\n"
"Usage: p4dctl dump [-t <type>] <server name>\n"
"       p4dctl status [-t <type>] -a\n"
"\n"
"Without the -a flag, dumps information about a specific server.  Specifically,\n"
"information about the environment (as specified with p4d.conf) is dumped;  with\n"
"the -a flag, dumps information about all configured servers that the\n"
"running user has permission to check.\n"
"\n"
"If the -t flag is specified, then only servers of the specified type\n"
"will be dump.\n"
"\n"
};