<?xml version="1.0" encoding="ASCII"?>
<!--This file was created automatically by html2xhtml-->
<!--from the HTML stylesheets.-->
<xsl:stylesheet exclude-result-prefixes="d"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:d="http://docbook.org/ns/docbook"
xmlns="http://www.w3.org/1999/xhtml" version="1.0">
<!-- ********************************************************************
$Id: html.xsl 9306 2012-04-28 03:49:00Z bobstayton $
********************************************************************
This file is part of the XSL DocBook Stylesheet distribution.
See ../README or http://docbook.sf.net/release/xsl/current/ for
copyright and other information.
******************************************************************** -->
<!-- These variables set the align attribute value for HTML output based on
the writing-mode specified in the gentext file for the document's lang. -->
<xsl:variable name="direction.align.start">
<xsl:choose>
<xsl:when test="starts-with($writing.mode, 'lr')">left</xsl:when>
<xsl:when test="starts-with($writing.mode, 'rl')">right</xsl:when>
<xsl:otherwise>left</xsl:otherwise>
</xsl:choose>
</xsl:variable>
<xsl:variable name="direction.align.end">
<xsl:choose>
<xsl:when test="starts-with($writing.mode, 'lr')">right</xsl:when>
<xsl:when test="starts-with($writing.mode, 'rl')">left</xsl:when>
<xsl:otherwise>right</xsl:otherwise>
</xsl:choose>
</xsl:variable>
<xsl:variable name="direction.mode">
<xsl:choose>
<xsl:when test="starts-with($writing.mode, 'lr')">ltr</xsl:when>
<xsl:when test="starts-with($writing.mode, 'rl')">rtl</xsl:when>
<xsl:otherwise>ltr</xsl:otherwise>
</xsl:choose>
</xsl:variable>
<!-- Support switching to <section> for HTML5 stylesheet -->
<!-- This is an internal variable that does not need to be set by a user -->
<xsl:variable name="div.element">div</xsl:variable>
<!-- Support turning off table border with border="" for HTML5 -->
<xsl:variable name="table.border.off">0</xsl:variable>
<!-- The generate.html.title template is currently used for generating HTML -->
<!-- "title" attributes for some inline elements only, but not for any -->
<!-- block elements. It is called in eleven places in the inline.xsl -->
<!-- file. But it's called by all the inline.* templates (e.g., -->
<!-- inline.boldseq), which in turn are called by other (element) -->
<!-- templates, so it results, currently, in supporting generation of the -->
<!-- HTML "title" attribute for a total of about 92 elements. -->
<!-- You can use mode="html.title.attribute" to get a title for -->
<!-- an element specified by a param, including targets of cross references. -->
<xsl:template name="generate.html.title">
<xsl:apply-templates select="." mode="html.title.attribute"/>
</xsl:template>
<xsl:template match="d:acronym|d:abbrev" mode="html.title.attribute">
<xsl:if test="d:alt">
<xsl:attribute name="title">
<xsl:value-of select="normalize-space(d:alt)"/>
</xsl:attribute>
</xsl:if>
</xsl:template>
<!-- Generate a title attribute for the context node -->
<!-- This may be the target of an xref -->
<xsl:template match="*" mode="html.title.attribute">
<xsl:variable name="is.title">
<xsl:call-template name="gentext.template.exists">
<xsl:with-param name="context" select="'title'"/>
<xsl:with-param name="name" select="local-name(.)"/>
<xsl:with-param name="lang">
<xsl:call-template name="l10n.language"/>
</xsl:with-param>
</xsl:call-template>
</xsl:variable>
<xsl:variable name="is.title-numbered">
<xsl:call-template name="gentext.template.exists">
<xsl:with-param name="context" select="'title-numbered'"/>
<xsl:with-param name="name" select="local-name(.)"/>
<xsl:with-param name="lang">
<xsl:call-template name="l10n.language"/>
</xsl:with-param>
</xsl:call-template>
</xsl:variable>
<xsl:variable name="is.title-unnumbered">
<xsl:call-template name="gentext.template.exists">
<xsl:with-param name="context" select="'title-unnumbered'"/>
<xsl:with-param name="name" select="local-name(.)"/>
<xsl:with-param name="lang">
<xsl:call-template name="l10n.language"/>
</xsl:with-param>
</xsl:call-template>
</xsl:variable>
<xsl:variable name="has.title.markup">
<xsl:apply-templates select="." mode="title.markup">
<xsl:with-param name="verbose" select="0"/>
</xsl:apply-templates>
</xsl:variable>
<xsl:variable name="gentext.title">
<xsl:if test="$has.title.markup != '???TITLE???' and ($is.title != 0 or $is.title-numbered != 0 or $is.title-unnumbered != 0)">
<xsl:apply-templates select="." mode="object.title.markup.textonly"/>
</xsl:if>
</xsl:variable>
<xsl:choose>
<xsl:when test="string-length($gentext.title) != 0">
<xsl:attribute name="title">
<xsl:value-of select="$gentext.title"/>
</xsl:attribute>
</xsl:when>
<!-- Fall back to alt if available -->
<xsl:when test="d:alt">
<xsl:attribute name="title">
<xsl:value-of select="normalize-space(d:alt)"/>
</xsl:attribute>
</xsl:when>
</xsl:choose>
</xsl:template>
<xsl:template match="d:qandaentry" mode="html.title.attribute">
<xsl:apply-templates select="d:question" mode="html.title.attribute"/>
</xsl:template>
<xsl:template match="d:question" mode="html.title.attribute">
<xsl:variable name="label.text">
<xsl:apply-templates select="." mode="qanda.label"/>
</xsl:variable>
<xsl:choose>
<xsl:when test="string-length($label.text) != 0">
<xsl:attribute name="title">
<xsl:value-of select="$label.text"/>
</xsl:attribute>
</xsl:when>
<!-- Fall back to alt if available -->
<xsl:when test="d:alt">
<xsl:attribute name="title">
<xsl:value-of select="normalize-space(d:alt)"/>
</xsl:attribute>
</xsl:when>
</xsl:choose>
</xsl:template>
<xsl:template name="dir">
<xsl:param name="inherit" select="0"/>
<xsl:variable name="dir">
<xsl:choose>
<xsl:when test="@dir">
<xsl:value-of select="@dir"/>
</xsl:when>
<xsl:when test="$inherit != 0">
<xsl:value-of select="ancestor::*/@dir[1]"/>
</xsl:when>
</xsl:choose>
</xsl:variable>
<xsl:if test="$dir != ''">
<xsl:attribute name="dir">
<xsl:value-of select="$dir"/>
</xsl:attribute>
</xsl:if>
</xsl:template>
<xsl:template name="anchor">
<xsl:param name="node" select="."/>
<xsl:param name="conditional" select="1"/>
<xsl:choose>
<xsl:when test="$generate.id.attributes != 0">
<!-- No named anchors output when this param is set -->
</xsl:when>
<xsl:when test="$conditional = 0 or $node/@id or $node/@xml:id">
<a>
<xsl:attribute name="id">
<xsl:call-template name="object.id">
<xsl:with-param name="object" select="$node"/>
</xsl:call-template>
</xsl:attribute>
</a>
</xsl:when>
</xsl:choose>
</xsl:template>
<xsl:template name="id.attribute">
<xsl:param name="node" select="."/>
<xsl:param name="conditional" select="1"/>
<xsl:choose>
<xsl:when test="$generate.id.attributes = 0">
<!-- No id attributes when this param is zero -->
</xsl:when>
<xsl:when test="$conditional = 0 or $node/@id or $node/@xml:id">
<xsl:attribute name="id">
<xsl:call-template name="object.id">
<xsl:with-param name="object" select="$node"/>
</xsl:call-template>
</xsl:attribute>
</xsl:when>
</xsl:choose>
</xsl:template>
<xsl:template name="href.target.uri">
<xsl:param name="context" select="."/>
<xsl:param name="object" select="."/>
<xsl:text>#</xsl:text>
<xsl:call-template name="object.id">
<xsl:with-param name="object" select="$object"/>
</xsl:call-template>
</xsl:template>
<xsl:template name="href.target">
<xsl:param name="context" select="."/>
<xsl:param name="object" select="."/>
<xsl:text>#</xsl:text>
<xsl:call-template name="object.id">
<xsl:with-param name="object" select="$object"/>
</xsl:call-template>
</xsl:template>
<xsl:template name="href.target.with.base.dir">
<xsl:param name="context" select="."/>
<xsl:param name="object" select="."/>
<xsl:if test="$manifest.in.base.dir = 0">
<xsl:value-of select="$chunk.base.dir"/>
</xsl:if>
<xsl:call-template name="href.target">
<xsl:with-param name="context" select="$context"/>
<xsl:with-param name="object" select="$object"/>
</xsl:call-template>
</xsl:template>
<xsl:template name="dingbat">
<xsl:param name="dingbat">bullet</xsl:param>
<xsl:call-template name="dingbat.characters">
<xsl:with-param name="dingbat" select="$dingbat"/>
</xsl:call-template>
</xsl:template>
<xsl:template name="dingbat.characters">
<!-- now that I'm using the real serializer, all that dingbat malarky -->
<!-- isn't necessary anymore... -->
<xsl:param name="dingbat">bullet</xsl:param>
<xsl:choose>
<xsl:when test="$dingbat='bullet'">•</xsl:when>
<xsl:when test="$dingbat='copyright'">©</xsl:when>
<xsl:when test="$dingbat='trademark'">™</xsl:when>
<xsl:when test="$dingbat='trade'">™</xsl:when>
<xsl:when test="$dingbat='registered'">®</xsl:when>
<xsl:when test="$dingbat='service'">(SM)</xsl:when>
<xsl:when test="$dingbat='nbsp'"> </xsl:when>
<xsl:when test="$dingbat='ldquo'">“</xsl:when>
<xsl:when test="$dingbat='rdquo'">”</xsl:when>
<xsl:when test="$dingbat='lsquo'">‘</xsl:when>
<xsl:when test="$dingbat='rsquo'">’</xsl:when>
<xsl:when test="$dingbat='em-dash'">—</xsl:when>
<xsl:when test="$dingbat='mdash'">—</xsl:when>
<xsl:when test="$dingbat='en-dash'">–</xsl:when>
<xsl:when test="$dingbat='ndash'">–</xsl:when>
<xsl:otherwise>
<xsl:text>•</xsl:text>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
<xsl:template name="id.warning">
<xsl:if test="$id.warnings != 0 and not(@id) and not(@xml:id) and parent::*">
<xsl:variable name="title">
<xsl:choose>
<xsl:when test="d:title">
<xsl:value-of select="d:title[1]"/>
</xsl:when>
<xsl:when test="substring(local-name(*[1]), string-length(local-name(*[1])-3) = 'info') and *[1]/d:title">
<xsl:value-of select="*[1]/d:title[1]"/>
</xsl:when>
<xsl:when test="d:refmeta/d:refentrytitle">
<xsl:value-of select="d:refmeta/d:refentrytitle"/>
</xsl:when>
<xsl:when test="d:refnamediv/d:refname">
<xsl:value-of select="d:refnamediv/d:refname[1]"/>
</xsl:when>
</xsl:choose>
</xsl:variable>
<xsl:message>
<xsl:text>ID recommended on </xsl:text>
<xsl:value-of select="local-name(.)"/>
<xsl:if test="$title != ''">
<xsl:text>: </xsl:text>
<xsl:choose>
<xsl:when test="string-length($title) > 40">
<xsl:value-of select="substring($title,1,40)"/>
<xsl:text>...</xsl:text>
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$title"/>
</xsl:otherwise>
</xsl:choose>
</xsl:if>
</xsl:message>
</xsl:if>
</xsl:template>
<xsl:template name="generate.class.attribute">
<xsl:param name="class" select="local-name(.)"/>
<xsl:apply-templates select="." mode="class.attribute">
<xsl:with-param name="class" select="$class"/>
</xsl:apply-templates>
</xsl:template>
<xsl:template match="*" mode="class.attribute">
<xsl:param name="class" select="local-name(.)"/>
<!-- permit customization of class attributes -->
<!-- Use element name by default -->
<xsl:variable name="class.value">
<xsl:apply-templates select="." mode="class.value">
<xsl:with-param name="class" select="$class"/>
</xsl:apply-templates>
</xsl:variable>
<xsl:if test="string-length(normalize-space($class.value)) != 0">
<xsl:attribute name="class">
<xsl:value-of select="$class.value"/>
</xsl:attribute>
</xsl:if>
</xsl:template>
<xsl:template match="*" mode="class.value">
<xsl:param name="class" select="local-name(.)"/>
<!-- permit customization of class value only -->
<!-- Use element name by default -->
<xsl:value-of select="$class"/>
</xsl:template>
<!-- Apply common attributes such as class, lang, dir -->
<xsl:template name="common.html.attributes">
<xsl:param name="inherit" select="0"/>
<xsl:param name="class" select="local-name(.)"/>
<xsl:apply-templates select="." mode="common.html.attributes">
<xsl:with-param name="class" select="$class"/>
<xsl:with-param name="inherit" select="$inherit"/>
</xsl:apply-templates>
</xsl:template>
<xsl:template match="*" mode="common.html.attributes">
<xsl:param name="class" select="local-name(.)"/>
<xsl:param name="inherit" select="0"/>
<xsl:call-template name="generate.html.lang"/>
<xsl:call-template name="dir">
<xsl:with-param name="inherit" select="$inherit"/>
</xsl:call-template>
<xsl:apply-templates select="." mode="class.attribute">
<xsl:with-param name="class" select="$class"/>
</xsl:apply-templates>
</xsl:template>
<!-- Apply common attributes not including class -->
<xsl:template name="locale.html.attributes">
<xsl:apply-templates select="." mode="locale.html.attributes"/>
</xsl:template>
<xsl:template match="*" mode="locale.html.attributes">
<xsl:call-template name="generate.html.lang"/>
<xsl:call-template name="dir"/>
</xsl:template>
<!-- Pass through any lang attributes -->
<xsl:template name="generate.html.lang">
<xsl:apply-templates select="." mode="html.lang.attribute"/>
</xsl:template>
<xsl:template match="*" mode="html.lang.attribute">
<!-- match the attribute name to the output type -->
<xsl:choose>
<xsl:when test="@lang and $stylesheet.result.type = 'html'">
<xsl:attribute name="lang">
<xsl:value-of select="@lang"/>
</xsl:attribute>
</xsl:when>
<xsl:when test="@lang and $stylesheet.result.type = 'xhtml'">
<xsl:attribute name="xml:lang">
<xsl:value-of select="@lang"/>
</xsl:attribute>
</xsl:when>
<xsl:when test="@xml:lang and $stylesheet.result.type = 'html'">
<xsl:attribute name="lang">
<xsl:value-of select="@xml:lang"/>
</xsl:attribute>
</xsl:when>
<xsl:when test="@xml:lang and $stylesheet.result.type = 'xhtml'">
<xsl:attribute name="xml:lang">
<xsl:value-of select="@xml:lang"/>
</xsl:attribute>
</xsl:when>
</xsl:choose>
</xsl:template>
<!-- ==================================================================== -->
<!-- Insert link to css or insert literal CSS in head element -->
<xsl:template name="generate.css">
<xsl:choose>
<xsl:when test="$generate.css.header = 0">
<xsl:call-template name="generate.css.links"/>
</xsl:when>
<xsl:otherwise>
<xsl:call-template name="generate.css.headers"/>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
<xsl:template name="generate.css.headers">
<xsl:call-template name="generate.default.css.header"/>
<xsl:call-template name="generate.custom.css.header"/>
</xsl:template>
<xsl:template name="generate.default.css.header">
<xsl:if test="$make.clean.html != 0 and $docbook.css.source != ''">
<!-- Select default file relative to stylesheet -->
<xsl:variable name="css.node" select="document($docbook.css.source)/*[1]"/>
<xsl:call-template name="output.css.header">
<xsl:with-param name="css.node" select="$css.node"/>
</xsl:call-template>
</xsl:if>
</xsl:template>
<xsl:template name="generate.custom.css.header">
<xsl:if test="$custom.css.source != ''">
<!-- Select custom file relative to document -->
<xsl:variable name="css.node" select="document($custom.css.source,.)/*[1]"/>
<xsl:call-template name="output.css.header">
<xsl:with-param name="css.node" select="$css.node"/>
</xsl:call-template>
</xsl:if>
</xsl:template>
<xsl:template name="output.css.header">
<xsl:param name="css.node"/>
<xsl:choose>
<xsl:when test="count($css.node) = 0">
</xsl:when>
<xsl:otherwise>
<style type="text/css">
<xsl:copy-of select="$css.node/text()"/>
</style>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
<!-- ==================================================================== -->
<xsl:template name="generate.css.links">
<xsl:call-template name="generate.default.css.link"/>
<xsl:call-template name="generate.custom.css.link"/>
</xsl:template>
<xsl:template name="generate.default.css.link">
<xsl:if test="$make.clean.html != 0 and $docbook.css.link != 0 and $docbook.css.source != ''">
<xsl:variable name="filename">
<xsl:call-template name="css.output.filename">
<xsl:with-param name="src" select="$docbook.css.source"/>
</xsl:call-template>
</xsl:variable>
<xsl:call-template name="make.css.link">
<xsl:with-param name="css.filename" select="$filename"/>
</xsl:call-template>
</xsl:if>
</xsl:template>
<xsl:template name="generate.custom.css.link">
<xsl:if test="$custom.css.source != ''">
<xsl:variable name="filename">
<xsl:call-template name="css.output.filename">
<xsl:with-param name="src" select="$custom.css.source"/>
</xsl:call-template>
</xsl:variable>
<xsl:call-template name="make.css.link">
<xsl:with-param name="css.filename" select="$filename"/>
</xsl:call-template>
</xsl:if>
</xsl:template>
<!-- a CSS link reference must take into account the relative
path to a CSS file when chunked HTML is output to more than one directory -->
<xsl:template name="make.css.link">
<xsl:param name="css.filename" select="''"/>
<xsl:variable name="href">
<xsl:call-template name="relative.path.link">
<xsl:with-param name="target.pathname" select="$css.filename"/>
</xsl:call-template>
</xsl:variable>
<xsl:if test="string-length($css.filename) != 0">
<link rel="stylesheet" type="text/css" href="{$href}"/>
</xsl:if>
</xsl:template>
<!-- And the same applies to script links -->
<xsl:template name="make.script.link">
<xsl:param name="script.filename" select="''"/>
<xsl:variable name="src">
<xsl:call-template name="relative.path.link">
<xsl:with-param name="target.pathname" select="$script.filename"/>
</xsl:call-template>
</xsl:variable>
<xsl:if test="string-length($script.filename) != 0">
<script>
<xsl:attribute name="src">
<xsl:value-of select="$src"/>
</xsl:attribute>
<xsl:attribute name="type">
<xsl:value-of select="$html.script.type"/>
</xsl:attribute>
<xsl:call-template name="other.script.attributes">
<xsl:with-param name="script.filename" select="$script.filename"/>
</xsl:call-template>
</script>
</xsl:if>
</xsl:template>
<xsl:template name="other.script.attributes">
<xsl:param name="script.filename"/>
<!-- Placeholder template to allow customization to
insert additional script element attributes if needed -->
</xsl:template>
<xsl:template name="relative.path.link">
<xsl:param name="target.pathname"/>
<xsl:variable name="href.to.uri" select="$target.pathname"/>
<xsl:variable name="href.from.uri">
<xsl:call-template name="href.target.uri">
<xsl:with-param name="object" select="."/>
</xsl:call-template>
</xsl:variable>
<xsl:variable name="href.to">
<xsl:call-template name="trim.common.uri.paths">
<xsl:with-param name="uriA" select="$href.to.uri"/>
<xsl:with-param name="uriB" select="$href.from.uri"/>
<xsl:with-param name="return" select="'A'"/>
</xsl:call-template>
</xsl:variable>
<xsl:variable name="href.from">
<xsl:call-template name="trim.common.uri.paths">
<xsl:with-param name="uriA" select="$href.to.uri"/>
<xsl:with-param name="uriB" select="$href.from.uri"/>
<xsl:with-param name="return" select="'B'"/>
</xsl:call-template>
</xsl:variable>
<xsl:variable name="depth">
<xsl:call-template name="count.uri.path.depth">
<xsl:with-param name="filename" select="$href.from"/>
</xsl:call-template>
</xsl:variable>
<xsl:variable name="href">
<xsl:call-template name="copy-string">
<xsl:with-param name="string" select="'../'"/>
<xsl:with-param name="count" select="$depth"/>
</xsl:call-template>
<xsl:value-of select="$href.to"/>
</xsl:variable>
<xsl:value-of select="$href"/>
</xsl:template>
<!-- ==================================================================== -->
<xsl:template name="generate.css.files">
<xsl:call-template name="generate.default.css.file"/>
<xsl:call-template name="generate.custom.css.file"/>
</xsl:template>
<xsl:template name="generate.default.css.file">
<xsl:if test="$make.clean.html != 0 and $generate.css.header = 0 and $docbook.css.source != ''">
<!-- Select default file relative to stylesheet -->
<xsl:variable name="css.node" select="document($docbook.css.source)/*[1]"/>
<xsl:call-template name="generate.css.file">
<xsl:with-param name="src" select="$docbook.css.source"/>
<xsl:with-param name="css.node" select="$css.node"/>
</xsl:call-template>
</xsl:if>
</xsl:template>
<xsl:template name="generate.custom.css.file">
<xsl:if test="$custom.css.source != '' and $generate.css.header = 0">
<!-- Select custom file relative to document -->
<xsl:variable name="css.node" select="document($custom.css.source,.)/*[1]"/>
<xsl:call-template name="generate.css.file">
<xsl:with-param name="src" select="$custom.css.source"/>
<xsl:with-param name="css.node" select="$css.node"/>
</xsl:call-template>
</xsl:if>
</xsl:template>
<xsl:template name="generate.css.file">
<xsl:param name="css.node"/>
<xsl:param name="src" select="''"/>
<xsl:variable name="css.text" select="$css.node/text()"/>
<xsl:choose>
<xsl:when test="count($css.node) = 0">
<xsl:message>
<xsl:text>ERROR: no root element for CSS source file'</xsl:text>
<xsl:value-of select="$src"/>
<xsl:text>'.</xsl:text>
</xsl:message>
</xsl:when>
<xsl:otherwise>
<xsl:variable name="filename">
<xsl:call-template name="css.output.pathname">
<xsl:with-param name="src" select="$src"/>
<xsl:with-param name="content" select="$css.node"/>
</xsl:call-template>
</xsl:variable>
<xsl:call-template name="write.text.chunk">
<xsl:with-param name="filename" select="$filename"/>
<xsl:with-param name="content" select="$css.text"/>
</xsl:call-template>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
<xsl:template name="css.output.filename">
<xsl:param name="content"/>
<xsl:param name="src" select="''"/>
<xsl:variable name="candidate">
<xsl:choose>
<xsl:when test="string-length($src) = 0">
<xsl:message>
<xsl:text>ERROR: missing CSS input filename.</xsl:text>
</xsl:message>
</xsl:when>
<xsl:when test="substring($src,string-length($src)-3) = '.xml'">
<xsl:value-of select="substring($src, 1, string-length($src) - 4)"/>
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$src"/>
</xsl:otherwise>
</xsl:choose>
</xsl:variable>
<xsl:value-of select="$candidate"/>
</xsl:template>
<xsl:template name="css.output.pathname">
<xsl:param name="content"/>
<xsl:param name="src" select="''"/>
<xsl:variable name="file">
<xsl:call-template name="css.output.filename">
<xsl:with-param name="content" select="$content"/>
<xsl:with-param name="src" select="$src"/>
</xsl:call-template>
</xsl:variable>
<xsl:variable name="path" select="concat($chunk.base.dir, $file)"/>
<xsl:value-of select="$path"/>
</xsl:template>
</xsl:stylesheet>
| # | Change | User | Description | Committed | |
|---|---|---|---|---|---|
| #1 | 26953 | Paul Allen | Move //guest/perforce_software/p4convert to //guest/perforce_software/p4convert/main | ||
| //guest/perforce_software/p4convert/docs/docbook-xsl-ns-1.78.1/xhtml-1_1/html.xsl | |||||
| #2 | 14806 | Paul Allen | Update docs and add +w. | ||
| #1 | 13920 | Paul Allen | copy part 2 (no errors) | ||
| //guest/paul_allen/p4convert-maven/docs/docbook-xsl-ns-1.78.1/xhtml-1_1/html.xsl | |||||
| #1 | 13895 | Paul Allen | Copying using p4convert-docbook | ||
| //guest/perforce_software/doc_build/main/docbook-xsl-ns-1.78.1/xhtml-1_1/html.xsl | |||||
| #1 | 12728 | eedwards |
Upgrade ANT doc build infrastructure to assemble PDFs: - remove non-namespaced DocBook source and add namespaced DocBook source. - add Apache FOP 1.1 - copy fonts, images, XSL into _build, establishing new asset structure. The original structure remains until all guides using it can be upgraded, and several other issues can be resolved. - updated build.xml to allow for per-target build properties. - upgraded the P4SAG to use the new infrastructure. - tweaked admonition presentation in PDFs to remove admonition graphics, and resemble closely the presentation used in the new HTML layout, including the same colors. With these changes, building PDFs involves using a shell, navigating into the guide's directory (just P4SAG for now), and executing "ant pdf". Issues still to be resolved: - PDF generation encounters several warnings about missing fonts (bold versions of Symbol and ZapfDingbats), and a couple of locations where the page content exceeds the defined content area. - Due to issues within Apache FOP, PDF generation emits a substantial amount of output that is not easily suppressed without losing important warning information. - Apache FOP's interface to ANT does not expose a way to set the font base directory. The current configuration does work under Mac OSX, but further testing on Windows will need to be done to determine if the relative paths defined continue to work. The workaround is for Windows users to customize the fop-config.xml to provide absolute system paths to the required fonts. - HTML generation needs further browser testing, and exhibits broken navigation on iOS browsers within the TOC sidebar. - A number of PDF and HTML presentation tweaks still need to be made, for example: sidebars, gui* DocBook tags, whitespace, section separation, etc. |
||