scripted_tests.cfg #7

# Test Data File for Scripted Tests.
#
# Each test is a one-line entry of the form:
#
# <TestGroup>|<TestScript>|<ExitCode>|[<Host>:]<TestLog>|<ExpectedStringRegex>|<Comments>
# 
# Where:
# <TestGroup> is an arbitrary name used to apply to a group of tests, allowing that group
# of tests to be executed independently of other configured tests. By default, all
# tests are executed; call run_scripted_tests.sh with '-g <TestGroup>' to indicate that the
# specified group tests are to run. This is intended to speed up interactive testing for
# a focused group of tests.
#
# <TestScript> is a script to call. It can setup arbitrarily sophisticated
# tests. The script should accept no parameters. It should display some
# indication of the scenario being setup to test.
# The value of TestScript should be of the form:
#
# test_script-<TestDesc>.sh
#
# where <TestDesc> should contain letters, numbers, and underscores, but not
# dash or other special characters. For example, it could be:
# test_script-recover_correct_ckp_1.sh.  The _1 numeric suffix can be used
# to group together a family of related tests with TestDesc values that
# vary only by the suffix.  Scripts must exist in the test directory in a
# Battle School Lab Environment, i.e. /p4/sdp/test/bsw.
#
# The <TestScript> value can also be the special value 'no_script', meaning that no
# test script is executed. This allows additional checks of logs to be done based
# on the execution of the most recent executed test.
#
# <ExitCode> is the expected exit code, which must be a whole number (integer 0 or
# greater). If the actual test exist code is not match, the test is deemed to have
# failed.  A special value of 'U' meaning Undefined can be supplied rather than a
# whole number to indicate that any exit code is accepted.  (The test may still fail
# depending on the <Output> checks).
#
# If <TestScript> is set to 'no_script', the exit code is ignored, so fill a '-'
# in for the <ExitCode> field.
#
# <TestLog> Specify the absolute path to the log containing the expected string,
# or the special value 'output' to scan the output of the command rather than
# a log file. The <TestLost> can also be of the form <Host>:<Log> to indicate
# the expected string should be checked on the specified host. For example,
# a value of syd-helix-04:/p4/1/logs/recreate_offline_db.og will check that
# log on the syd-helix-04 host.
#
# The special value 'output' cannot be used if TestScript is set to 'no_script'.
#
# <ExpectedStringRegex> is a string of text expected of the executed command in
# either the output or a given logfile. The string can be a regular expression.
#
# <Comments> are short comments for the human reviewer of the test, describing what
# is expected in the output, what is being tested, etc.

# <TestGroup>|<TestScript>|<ExitCode>|[<Host>:]<TestLog>|<ExpectedStringRegex>|<Comments>

#==============================================================================
# Tests for recovering correct checkpoint for functions in backup_functions.sh.

#------------------------------------------------------------------------------
RecoverCorrectCKP|test_script-recover_correct_ckp_1.sh|0|/p4/1/logs/checkpoint.log|^Recovering from /p4/1/checkpoints/p4_1.ckp.*.gz|Serial checkpoint on commit.
RecoverCorrectCKP|no_script|-|/p4/1/logs/checkpoint.log|End p4_1 Checkpoint$|Checkpoint OK

#------------------------------------------------------------------------------
RecoverCorrectCKP|test_script-recover_correct_ckp_2.sh|0|/p4/1/logs/checkpoint.log|/p4/1/bin/p4d_1 -r /p4/1/offline_db -z -N 4 -jrp /p4/1/checkpoints/p4_1.ckp.|Checkpoint replay with -jrp on commit.
RecoverCorrectCKP|no_script|-|/p4/1/logs/checkpoint.log|^Recovering from /p4/1/checkpoints/p4_1.ckp.*\.\.\.|Replay of parallel checkpoint.
RecoverCorrectCKP|no_script|-|/p4/1/logs/checkpoint.log|End p4_1 Checkpoint$|Checkpoint OK

#------------------------------------------------------------------------------
RecoverCorrectCKP|test_script-recover_correct_ckp_3.sh|0|syd-helix-04:/p4/1/logs/request_checkpoint.log|Running: /p4/1/bin/p4_1 admin checkpoint -Z$|Serial checkpoint requested on edge.
RecoverCorrectCKP|no_script|-|syd-helix-04:/p4/1/logs/recreate_offline_db.log|Running: /p4/1/bin/p4d_1 -r /p4/1/offline_db -jr /p4/1/checkpoints.edge_syd/p4_1.edge_syd.ckp.*.gz|Load correct serial checkpoint on edge.
RecoverCorrectCKP|no_script|-|syd-helix-04:/p4/1/logs/recreate_offline_db.log|End p4_1 recreate offline db|Verify edge offline_db rebuild OK.

#------------------------------------------------------------------------------
RecoverCorrectCKP|test_script-recover_correct_ckp_4.sh|0|syd-helix-04:/p4/1/logs/request_checkpoint.log|Running: /p4/1/bin/p4_1 admin checkpoint -Z -p -m -N 4|Parallel checkpoint requested on edge.
RecoverCorrectCKP|no_script|-|syd-helix-04:/p4/1/logs/recreate_offline_db.log|Running: /p4/1/bin/p4d_1 -r /p4/1/offline_db -z -N 4 -jrp /p4/1/checkpoints.edge_syd/p4_1.edge_syd.ckp.[0-9]+$|Load correct parallel checkpoint on edge.
RecoverCorrectCKP|no_script|-|syd-helix-04:/p4/1/logs/recreate_offline_db.log|End p4_1 recreate offline db|Verify edge offline_db rebuild OK.

#==============================================================================
# Tests for recovering checkpoints on edge servers.
#------------------------------------------------------------------------------
RecoverEdge|test_script-recover_edge_1.sh|0|syd-helix-04:/p4/1/logs/recover_edge.log|Phase 1: Recover edge seed from commit server into offline_db|Recover edge complete with recent workspaces.
RecoverEdge|no_script|-|syd-helix-04:/p4/1/logs/recover_edge.log|Recover checkpoint file from commit server|Verify edge received serial seed.
RecoverEdge|no_script|-|/p4/1/logs/edge_dump.log|Dumping to /p4/1/checkpoints/p4_1.edge_syd.seed.*.gz|Verify serial edge seed created.
RecoverEdge|no_script|-|/p4/1/logs/edge_dump.log|Edge seed checkpoint complete|Verify edge dump completed.
RecoverEdge|no_script|-|syd-helix-04:/p4/1/logs/recover_edge.log|Phase 4: Blend edge dump into offline_db|Check table blending on edge.
RecoverEdge|no_script|-|syd-helix-04:/p4/1/logs/recover_edge.log|Phase 7: Create a new edge checkpoint from offline_db|Check new edge checkpoint created.
RecoverEdge|no_script|-|syd-helix-04:/p4/1/logs/recover_edge.log|End p4_1 Recover Edge|Verify edge recovery completed.

#------------------------------------------------------------------------------
RecoverEdge|test_script-recover_edge_2.sh|0|syd-helix-04:/p4/1/logs/recover_edge.log|Phase 1: Recover edge seed from commit server into offline_db|Recover edge complete with recent workspaces.
RecoverEdge|no_script|-|syd-helix-04:/p4/1/logs/recover_edge.log|Recover checkpoint directory from commit server|Verify edge received parallel seed.
RecoverEdge|no_script|-|/p4/1/logs/edge_dump.log|Dumping to directory /p4/1/checkpoints/p4_1.edge_syd.seed.[0-9]+\.\.\.|Verify parallel edge seed created.
RecoverEdge|no_script|-|/p4/1/logs/edge_dump.log|Edge seed checkpoint complete|Verify edge dump completed.
RecoverEdge|no_script|-|syd-helix-04:/p4/1/logs/recover_edge.log|Phase 4: Blend edge dump into offline_db|Check table blending on edge.
RecoverEdge|no_script|-|syd-helix-04:/p4/1/logs/recover_edge.log|Phase 7: Create a new edge checkpoint from offline_db|Check new edge checkpoint created.
RecoverEdge|no_script|-|syd-helix-04:/p4/1/logs/recover_edge.log|End p4_1 Recover Edge|Verify edge recovery completed.

#==============================================================================
# Test for load_checkpoint.sh.

#------------------------------------------------------------------------------
LoadCheckpoint|test_script-load_checkpoint_1.sh|2|output|EXAMPLE|Man page check.

#------------------------------------------------------------------------------
LoadCheckpoint|test_script-load_checkpoint_2.sh|0|bos-helix-02:/p4/1/logs/load.log|Checkpoint to replay is: /p4/1/checkpoints/p4_1.ckp.*.gz .Seriel Checkpoint Replay.|Load serial checkpoint on standby.
LoadCheckpoint|no_script|0|bos-helix-02:/p4/1/logs/load.log|Current master journal state is|P4D alive after loading serial checkpoint on standby.
LoadCheckpoint|no_script|0|bos-helix-02:/p4/1/logs/load.log|All processing completed successfully.|Serial checkpoint on standby OK.
LoadCheckpoint|no_script|0|syd-helix-04:/p4/1/logs/load.log|Checkpoint to replay is: /p4/1/checkpoints.edge_syd/p4_1.edge_syd.ckp.*.gz|Load serial checkpoint on edge.
LoadCheckpoint|no_script|0|syd-helix-04:/p4/1/logs/load.log|Current master journal state is|P4D alive after loading serial checkpoint on edge.
LoadCheckpoint|no_script|0|syd-helix-04:/p4/1/logs/load.log|All processing completed successfully.|Serial checkpoint on edge OK.

#------------------------------------------------------------------------------
LoadCheckpoint|test_script-load_checkpoint_3.sh|0|bos-helix-02:/p4/1/logs/load.log|Checkpoint to replay is: /p4/1/checkpoints/p4_1.ckp.* .Parallel Checkpoint Replay|Load parallel checkpoint on standby.
LoadCheckpoint|no_script|0|bos-helix-02:/p4/1/logs/load.log|Current master journal state is|P4D alive after loading parallel checkpoint on standby.
LoadCheckpoint|no_script|0|bos-helix-02:/p4/1/logs/load.log|All processing completed successfully.|Parallel checkpoint on standby OK.
LoadCheckpoint|no_script|0|syd-helix-04:/p4/1/logs/load.log|Checkpoint to replay is: /p4/1/checkpoints.edge_syd/p4_1.edge_syd.ckp.* .Parallel Checkpoint Replay|Load parallel checkpoint on edge.
LoadCheckpoint|no_script|0|syd-helix-04:/p4/1/logs/load.log|Current master journal state is|P4D alive after loading parallel checkpoint on edge.
LoadCheckpoint|no_script|0|syd-helix-04:/p4/1/logs/load.log|All processing completed successfully.|Parallel checkpoint on edge OK.