<?xml version="1.0" encoding="UTF-8"?>
<!--
*** GENERATED FROM project.xml - DO NOT EDIT ***
*** EDIT ../build.xml INSTEAD ***
For the purpose of easier reading the script
is divided into following sections:
- initialization
- compilation
- jar
- execution
- debugging
- javadoc
- junit compilation
- junit execution
- junit debugging
- applet
- cleanup
-->
<project xmlns:j2seproject1="http://www.netbeans.org/ns/j2se-project/1" xmlns:j2seproject3="http://www.netbeans.org/ns/j2se-project/3" xmlns:jaxrpc="http://www.netbeans.org/ns/j2se-project/jax-rpc" basedir=".." default="default" name="JGrow-impl">
<fail message="Please build using Ant 1.7.1 or higher.">
<condition>
<not>
<antversion atleast="1.7.1"/>
</not>
</condition>
</fail>
<target depends="test,jar,javadoc" description="Build and test whole project." name="default"/>
<!--
======================
INITIALIZATION SECTION
======================
-->
<target name="-pre-init">
<!-- Empty placeholder for easier customization. -->
<!-- You can override this target in the ../build.xml file. -->
</target>
<target depends="-pre-init" name="-init-private">
<property file="nbproject/private/config.properties"/>
<property file="nbproject/private/configs/${config}.properties"/>
<property file="nbproject/private/private.properties"/>
</target>
<target depends="-pre-init,-init-private" name="-init-user">
<property file="${user.properties.file}"/>
<!-- The two properties below are usually overridden -->
<!-- by the active platform. Just a fallback. -->
<property name="default.javac.source" value="1.4"/>
<property name="default.javac.target" value="1.4"/>
</target>
<target depends="-pre-init,-init-private,-init-user" name="-init-project">
<property file="nbproject/configs/${config}.properties"/>
<property file="nbproject/project.properties"/>
</target>
<target depends="-pre-init,-init-private,-init-user,-init-project,-init-macrodef-property" name="-do-init">
<available file="${manifest.file}" property="manifest.available"/>
<available file="${application.splash}" property="splashscreen.available"/>
<condition property="main.class.available">
<and>
<isset property="main.class"/>
<not>
<equals arg1="${main.class}" arg2="" trim="true"/>
</not>
</and>
</condition>
<condition property="manifest.available+main.class">
<and>
<isset property="manifest.available"/>
<isset property="main.class.available"/>
</and>
</condition>
<condition property="do.mkdist">
<and>
<isset property="libs.CopyLibs.classpath"/>
<not>
<istrue value="${mkdist.disabled}"/>
</not>
</and>
</condition>
<condition property="manifest.available+main.class+mkdist.available">
<and>
<istrue value="${manifest.available+main.class}"/>
<isset property="do.mkdist"/>
</and>
</condition>
<condition property="manifest.available+main.class+mkdist.available+splashscreen.available">
<and>
<istrue value="${manifest.available+main.class+mkdist.available}"/>
<istrue value="${splashscreen.available}"/>
</and>
</condition>
<condition property="do.archive">
<not>
<istrue value="${jar.archive.disabled}"/>
</not>
</condition>
<condition property="do.archive+manifest.available">
<and>
<isset property="manifest.available"/>
<istrue value="${do.archive}"/>
</and>
</condition>
<condition property="do.archive+manifest.available+main.class">
<and>
<istrue value="${manifest.available+main.class}"/>
<istrue value="${do.archive}"/>
</and>
</condition>
<condition property="do.archive+manifest.available+main.class+mkdist.available">
<and>
<istrue value="${manifest.available+main.class+mkdist.available}"/>
<istrue value="${do.archive}"/>
</and>
</condition>
<condition property="do.archive+manifest.available+main.class+mkdist.available+splashscreen.available">
<and>
<istrue value="${manifest.available+main.class+mkdist.available+splashscreen.available}"/>
<istrue value="${do.archive}"/>
</and>
</condition>
<condition property="have.tests">
<or>
<available file="${test.src.dir}"/>
</or>
</condition>
<condition property="have.sources">
<or>
<available file="${src.dir}"/>
</or>
</condition>
<condition property="netbeans.home+have.tests">
<and>
<isset property="netbeans.home"/>
<isset property="have.tests"/>
</and>
</condition>
<condition property="no.javadoc.preview">
<and>
<isset property="javadoc.preview"/>
<isfalse value="${javadoc.preview}"/>
</and>
</condition>
<property name="run.jvmargs" value=""/>
<property name="javac.compilerargs" value=""/>
<property name="work.dir" value="${basedir}"/>
<condition property="no.deps">
<and>
<istrue value="${no.dependencies}"/>
</and>
</condition>
<property name="javac.debug" value="true"/>
<property name="javadoc.preview" value="true"/>
<property name="application.args" value=""/>
<property name="source.encoding" value="${file.encoding}"/>
<property name="runtime.encoding" value="${source.encoding}"/>
<condition property="javadoc.encoding.used" value="${javadoc.encoding}">
<and>
<isset property="javadoc.encoding"/>
<not>
<equals arg1="${javadoc.encoding}" arg2=""/>
</not>
</and>
</condition>
<property name="javadoc.encoding.used" value="${source.encoding}"/>
<property name="includes" value="**"/>
<property name="excludes" value=""/>
<property name="do.depend" value="false"/>
<condition property="do.depend.true">
<istrue value="${do.depend}"/>
</condition>
<path id="endorsed.classpath.path" path="${endorsed.classpath}"/>
<condition else="" property="endorsed.classpath.cmd.line.arg" value="-Xbootclasspath/p:'${toString:endorsed.classpath.path}'">
<length length="0" string="${endorsed.classpath}" when="greater"/>
</condition>
<property name="javac.fork" value="false"/>
<property name="jar.index" value="false"/>
<available file="${meta.inf.dir}/persistence.xml" property="has.persistence.xml"/>
</target>
<target name="-post-init">
<!-- Empty placeholder for easier customization. -->
<!-- You can override this target in the ../build.xml file. -->
</target>
<target depends="-pre-init,-init-private,-init-user,-init-project,-do-init" name="-init-check">
<fail unless="src.dir">Must set src.dir</fail>
<fail unless="test.src.dir">Must set test.src.dir</fail>
<fail unless="build.dir">Must set build.dir</fail>
<fail unless="dist.dir">Must set dist.dir</fail>
<fail unless="build.classes.dir">Must set build.classes.dir</fail>
<fail unless="dist.javadoc.dir">Must set dist.javadoc.dir</fail>
<fail unless="build.test.classes.dir">Must set build.test.classes.dir</fail>
<fail unless="build.test.results.dir">Must set build.test.results.dir</fail>
<fail unless="build.classes.excludes">Must set build.classes.excludes</fail>
<fail unless="dist.jar">Must set dist.jar</fail>
</target>
<target name="-init-macrodef-property">
<macrodef name="property" uri="http://www.netbeans.org/ns/j2se-project/1">
<attribute name="name"/>
<attribute name="value"/>
<sequential>
<property name="@{name}" value="${@{value}}"/>
</sequential>
</macrodef>
</target>
<target depends="-init-ap-cmdline-properties" if="ap.supported.internal" name="-init-macrodef-javac-with-processors">
<macrodef name="javac" uri="http://www.netbeans.org/ns/j2se-project/3">
<attribute default="${src.dir}" name="srcdir"/>
<attribute default="${build.classes.dir}" name="destdir"/>
<attribute default="${javac.classpath}" name="classpath"/>
<attribute default="${javac.processorpath}" name="processorpath"/>
<attribute default="${build.generated.sources.dir}/ap-source-output" name="apgeneratedsrcdir"/>
<attribute default="${includes}" name="includes"/>
<attribute default="${excludes}" name="excludes"/>
<attribute default="${javac.debug}" name="debug"/>
<attribute default="${empty.dir}" name="sourcepath"/>
<attribute default="${empty.dir}" name="gensrcdir"/>
<element name="customize" optional="true"/>
<sequential>
<property location="${build.dir}/empty" name="empty.dir"/>
<mkdir dir="${empty.dir}"/>
<mkdir dir="@{apgeneratedsrcdir}"/>
<javac debug="@{debug}" deprecation="${javac.deprecation}" destdir="@{destdir}" encoding="${source.encoding}" excludes="@{excludes}" fork="${javac.fork}" includeantruntime="false" includes="@{includes}" source="${javac.source}" sourcepath="@{sourcepath}" srcdir="@{srcdir}" target="${javac.target}" tempdir="${java.io.tmpdir}">
<src>
<dirset dir="@{gensrcdir}" erroronmissingdir="false">
<include name="*"/>
</dirset>
</src>
<classpath>
<path path="@{classpath}"/>
</classpath>
<compilerarg line="${endorsed.classpath.cmd.line.arg}"/>
<compilerarg line="${javac.compilerargs}"/>
<compilerarg value="-processorpath"/>
<compilerarg path="@{processorpath}:${empty.dir}"/>
<compilerarg line="${ap.processors.internal}"/>
<compilerarg line="${annotation.processing.processor.options}"/>
<compilerarg value="-s"/>
<compilerarg path="@{apgeneratedsrcdir}"/>
<compilerarg line="${ap.proc.none.internal}"/>
<customize/>
</javac>
</sequential>
</macrodef>
</target>
<target depends="-init-ap-cmdline-properties" name="-init-macrodef-javac-without-processors" unless="ap.supported.internal">
<macrodef name="javac" uri="http://www.netbeans.org/ns/j2se-project/3">
<attribute default="${src.dir}" name="srcdir"/>
<attribute default="${build.classes.dir}" name="destdir"/>
<attribute default="${javac.classpath}" name="classpath"/>
<attribute default="${javac.processorpath}" name="processorpath"/>
<attribute default="${build.generated.sources.dir}/ap-source-output" name="apgeneratedsrcdir"/>
<attribute default="${includes}" name="includes"/>
<attribute default="${excludes}" name="excludes"/>
<attribute default="${javac.debug}" name="debug"/>
<attribute default="${empty.dir}" name="sourcepath"/>
<attribute default="${empty.dir}" name="gensrcdir"/>
<element name="customize" optional="true"/>
<sequential>
<property location="${build.dir}/empty" name="empty.dir"/>
<mkdir dir="${empty.dir}"/>
<javac debug="@{debug}" deprecation="${javac.deprecation}" destdir="@{destdir}" encoding="${source.encoding}" excludes="@{excludes}" fork="${javac.fork}" includeantruntime="false" includes="@{includes}" source="${javac.source}" sourcepath="@{sourcepath}" srcdir="@{srcdir}" target="${javac.target}" tempdir="${java.io.tmpdir}">
<src>
<dirset dir="@{gensrcdir}" erroronmissingdir="false">
<include name="*"/>
</dirset>
</src>
<classpath>
<path path="@{classpath}"/>
</classpath>
<compilerarg line="${endorsed.classpath.cmd.line.arg}"/>
<compilerarg line="${javac.compilerargs}"/>
<customize/>
</javac>
</sequential>
</macrodef>
</target>
<target depends="-init-macrodef-javac-with-processors,-init-macrodef-javac-without-processors" name="-init-macrodef-javac">
<macrodef name="depend" uri="http://www.netbeans.org/ns/j2se-project/3">
<attribute default="${src.dir}" name="srcdir"/>
<attribute default="${build.classes.dir}" name="destdir"/>
<attribute default="${javac.classpath}" name="classpath"/>
<sequential>
<depend cache="${build.dir}/depcache" destdir="@{destdir}" excludes="${excludes}" includes="${includes}" srcdir="@{srcdir}">
<classpath>
<path path="@{classpath}"/>
</classpath>
</depend>
</sequential>
</macrodef>
<macrodef name="force-recompile" uri="http://www.netbeans.org/ns/j2se-project/3">
<attribute default="${build.classes.dir}" name="destdir"/>
<sequential>
<fail unless="javac.includes">Must set javac.includes</fail>
<pathconvert pathsep="," property="javac.includes.binary">
<path>
<filelist dir="@{destdir}" files="${javac.includes}"/>
</path>
<globmapper from="*.java" to="*.class"/>
</pathconvert>
<delete>
<files includes="${javac.includes.binary}"/>
</delete>
</sequential>
</macrodef>
</target>
<target name="-init-macrodef-junit">
<macrodef name="junit" uri="http://www.netbeans.org/ns/j2se-project/3">
<attribute default="${includes}" name="includes"/>
<attribute default="${excludes}" name="excludes"/>
<attribute default="**" name="testincludes"/>
<sequential>
<junit dir="${work.dir}" errorproperty="tests.failed" failureproperty="tests.failed" fork="true" showoutput="true" tempdir="${build.dir}">
<batchtest todir="${build.test.results.dir}">
<fileset dir="${test.src.dir}" excludes="@{excludes},${excludes}" includes="@{includes}">
<filename name="@{testincludes}"/>
</fileset>
</batchtest>
<classpath>
<path path="${run.test.classpath}"/>
</classpath>
<syspropertyset>
<propertyref prefix="test-sys-prop."/>
<mapper from="test-sys-prop.*" to="*" type="glob"/>
</syspropertyset>
<formatter type="brief" usefile="false"/>
<formatter type="xml"/>
<jvmarg line="${endorsed.classpath.cmd.line.arg}"/>
<jvmarg line="${run.jvmargs}"/>
</junit>
</sequential>
</macrodef>
</target>
<target depends="-init-debug-args" name="-init-macrodef-nbjpda">
<macrodef name="nbjpdastart" uri="http://www.netbeans.org/ns/j2se-project/1">
<attribute default="${main.class}" name="name"/>
<attribute default="${debug.classpath}" name="classpath"/>
<attribute default="" name="stopclassname"/>
<sequential>
<nbjpdastart addressproperty="jpda.address" name="@{name}" stopclassname="@{stopclassname}" transport="${debug-transport}">
<classpath>
<path path="@{classpath}"/>
</classpath>
</nbjpdastart>
</sequential>
</macrodef>
<macrodef name="nbjpdareload" uri="http://www.netbeans.org/ns/j2se-project/1">
<attribute default="${build.classes.dir}" name="dir"/>
<sequential>
<nbjpdareload>
<fileset dir="@{dir}" includes="${fix.classes}">
<include name="${fix.includes}*.class"/>
</fileset>
</nbjpdareload>
</sequential>
</macrodef>
</target>
<target name="-init-debug-args">
<property name="version-output" value="java version "${ant.java.version}"/>
<condition property="have-jdk-older-than-1.4">
<or>
<contains string="${version-output}" substring="java version "1.0"/>
<contains string="${version-output}" substring="java version "1.1"/>
<contains string="${version-output}" substring="java version "1.2"/>
<contains string="${version-output}" substring="java version "1.3"/>
</or>
</condition>
<condition else="-Xdebug" property="debug-args-line" value="-Xdebug -Xnoagent -Djava.compiler=none">
<istrue value="${have-jdk-older-than-1.4}"/>
</condition>
<condition else="dt_socket" property="debug-transport-by-os" value="dt_shmem">
<os family="windows"/>
</condition>
<condition else="${debug-transport-by-os}" property="debug-transport" value="${debug.transport}">
<isset property="debug.transport"/>
</condition>
</target>
<target depends="-init-debug-args" name="-init-macrodef-debug">
<macrodef name="debug" uri="http://www.netbeans.org/ns/j2se-project/3">
<attribute default="${main.class}" name="classname"/>
<attribute default="${debug.classpath}" name="classpath"/>
<element name="customize" optional="true"/>
<sequential>
<java classname="@{classname}" dir="${work.dir}" fork="true">
<jvmarg line="${endorsed.classpath.cmd.line.arg}"/>
<jvmarg line="${debug-args-line}"/>
<jvmarg value="-Xrunjdwp:transport=${debug-transport},address=${jpda.address}"/>
<jvmarg value="-Dfile.encoding=${runtime.encoding}"/>
<redirector errorencoding="${runtime.encoding}" inputencoding="${runtime.encoding}" outputencoding="${runtime.encoding}"/>
<jvmarg line="${run.jvmargs}"/>
<classpath>
<path path="@{classpath}"/>
</classpath>
<syspropertyset>
<propertyref prefix="run-sys-prop."/>
<mapper from="run-sys-prop.*" to="*" type="glob"/>
</syspropertyset>
<customize/>
</java>
</sequential>
</macrodef>
</target>
<target name="-init-macrodef-java">
<macrodef name="java" uri="http://www.netbeans.org/ns/j2se-project/1">
<attribute default="${main.class}" name="classname"/>
<attribute default="${run.classpath}" name="classpath"/>
<element name="customize" optional="true"/>
<sequential>
<java classname="@{classname}" dir="${work.dir}" fork="true">
<jvmarg line="${endorsed.classpath.cmd.line.arg}"/>
<jvmarg value="-Dfile.encoding=${runtime.encoding}"/>
<redirector errorencoding="${runtime.encoding}" inputencoding="${runtime.encoding}" outputencoding="${runtime.encoding}"/>
<jvmarg line="${run.jvmargs}"/>
<classpath>
<path path="@{classpath}"/>
</classpath>
<syspropertyset>
<propertyref prefix="run-sys-prop."/>
<mapper from="run-sys-prop.*" to="*" type="glob"/>
</syspropertyset>
<customize/>
</java>
</sequential>
</macrodef>
</target>
<target name="-init-macrodef-copylibs">
<macrodef name="copylibs" uri="http://www.netbeans.org/ns/j2se-project/3">
<element name="customize" optional="true"/>
<sequential>
<property location="${build.classes.dir}" name="build.classes.dir.resolved"/>
<pathconvert property="run.classpath.without.build.classes.dir">
<path path="${run.classpath}"/>
<map from="${build.classes.dir.resolved}" to=""/>
</pathconvert>
<pathconvert pathsep=" " property="jar.classpath">
<path path="${run.classpath.without.build.classes.dir}"/>
<chainedmapper>
<flattenmapper/>
<globmapper from="*" to="lib/*"/>
</chainedmapper>
</pathconvert>
<taskdef classname="org.netbeans.modules.java.j2seproject.copylibstask.CopyLibs" classpath="${libs.CopyLibs.classpath}" name="copylibs"/>
<copylibs compress="${jar.compress}" index="${jar.index}" jarfile="${dist.jar}" manifest="${manifest.file}" runtimeclasspath="${run.classpath.without.build.classes.dir}">
<fileset dir="${build.classes.dir}"/>
<manifest>
<attribute name="Class-Path" value="${jar.classpath}"/>
<customize/>
</manifest>
</copylibs>
</sequential>
</macrodef>
</target>
<target name="-init-presetdef-jar">
<presetdef name="jar" uri="http://www.netbeans.org/ns/j2se-project/1">
<jar compress="${jar.compress}" index="${jar.index}" jarfile="${dist.jar}">
<j2seproject1:fileset dir="${build.classes.dir}"/>
</jar>
</presetdef>
</target>
<target name="-init-ap-cmdline-properties">
<property name="annotation.processing.enabled" value="true"/>
<property name="annotation.processing.processors.list" value=""/>
<property name="annotation.processing.processor.options" value=""/>
<property name="annotation.processing.run.all.processors" value="true"/>
<property name="javac.processorpath" value="${javac.classpath}"/>
<property name="javac.test.processorpath" value="${javac.test.classpath}"/>
<condition property="ap.supported.internal" value="true">
<not>
<matches pattern="1\.[0-5](\..*)?" string="${javac.source}"/>
</not>
</condition>
</target>
<target depends="-init-ap-cmdline-properties" if="ap.supported.internal" name="-init-ap-cmdline-supported">
<condition else="" property="ap.processors.internal" value="-processor ${annotation.processing.processors.list}">
<isfalse value="${annotation.processing.run.all.processors}"/>
</condition>
<condition else="" property="ap.proc.none.internal" value="-proc:none">
<isfalse value="${annotation.processing.enabled}"/>
</condition>
</target>
<target depends="-init-ap-cmdline-properties,-init-ap-cmdline-supported" name="-init-ap-cmdline">
<property name="ap.cmd.line.internal" value=""/>
</target>
<target depends="-pre-init,-init-private,-init-user,-init-project,-do-init,-post-init,-init-check,-init-macrodef-property,-init-macrodef-javac,-init-macrodef-junit,-init-macrodef-nbjpda,-init-macrodef-debug,-init-macrodef-java,-init-presetdef-jar,-init-ap-cmdline" name="init"/>
<!--
===================
COMPILATION SECTION
===================
-->
<target name="-deps-jar-init" unless="built-jar.properties">
<property location="${build.dir}/built-jar.properties" name="built-jar.properties"/>
<delete file="${built-jar.properties}" quiet="true"/>
</target>
<target if="already.built.jar.${basedir}" name="-warn-already-built-jar">
<echo level="warn" message="Cycle detected: JGrow was already built"/>
</target>
<target depends="init,-deps-jar-init" name="deps-jar" unless="no.deps">
<mkdir dir="${build.dir}"/>
<touch file="${built-jar.properties}" verbose="false"/>
<property file="${built-jar.properties}" prefix="already.built.jar."/>
<antcall target="-warn-already-built-jar"/>
<propertyfile file="${built-jar.properties}">
<entry key="${basedir}" value=""/>
</propertyfile>
</target>
<target depends="init,-check-automatic-build,-clean-after-automatic-build" name="-verify-automatic-build"/>
<target depends="init" name="-check-automatic-build">
<available file="${build.classes.dir}/.netbeans_automatic_build" property="netbeans.automatic.build"/>
</target>
<target depends="init" if="netbeans.automatic.build" name="-clean-after-automatic-build">
<antcall target="clean"/>
</target>
<target depends="init,deps-jar" name="-pre-pre-compile">
<mkdir dir="${build.classes.dir}"/>
</target>
<target name="-pre-compile">
<!-- Empty placeholder for easier customization. -->
<!-- You can override this target in the ../build.xml file. -->
</target>
<target if="do.depend.true" name="-compile-depend">
<pathconvert property="build.generated.subdirs">
<dirset dir="${build.generated.sources.dir}" erroronmissingdir="false">
<include name="*"/>
</dirset>
</pathconvert>
<j2seproject3:depend srcdir="${src.dir}:${build.generated.subdirs}"/>
</target>
<target depends="init,deps-jar,-pre-pre-compile,-pre-compile, -copy-persistence-xml,-compile-depend" if="have.sources" name="-do-compile">
<j2seproject3:javac gensrcdir="${build.generated.sources.dir}"/>
<copy todir="${build.classes.dir}">
<fileset dir="${src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/>
</copy>
</target>
<target if="has.persistence.xml" name="-copy-persistence-xml">
<mkdir dir="${build.classes.dir}/META-INF"/>
<copy todir="${build.classes.dir}/META-INF">
<fileset dir="${meta.inf.dir}" includes="persistence.xml"/>
</copy>
</target>
<target name="-post-compile">
<!-- Empty placeholder for easier customization. -->
<!-- You can override this target in the ../build.xml file. -->
</target>
<target depends="init,deps-jar,-verify-automatic-build,-pre-pre-compile,-pre-compile,-do-compile,-post-compile" description="Compile project." name="compile"/>
<target name="-pre-compile-single">
<!-- Empty placeholder for easier customization. -->
<!-- You can override this target in the ../build.xml file. -->
</target>
<target depends="init,deps-jar,-pre-pre-compile" name="-do-compile-single">
<fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>
<j2seproject3:force-recompile/>
<j2seproject3:javac excludes="" gensrcdir="${build.generated.sources.dir}" includes="${javac.includes}" sourcepath="${src.dir}"/>
</target>
<target name="-post-compile-single">
<!-- Empty placeholder for easier customization. -->
<!-- You can override this target in the ../build.xml file. -->
</target>
<target depends="init,deps-jar,-verify-automatic-build,-pre-pre-compile,-pre-compile-single,-do-compile-single,-post-compile-single" name="compile-single"/>
<!--
====================
JAR BUILDING SECTION
====================
-->
<target depends="init" name="-pre-pre-jar">
<dirname file="${dist.jar}" property="dist.jar.dir"/>
<mkdir dir="${dist.jar.dir}"/>
</target>
<target name="-pre-jar">
<!-- Empty placeholder for easier customization. -->
<!-- You can override this target in the ../build.xml file. -->
</target>
<target depends="init,compile,-pre-pre-jar,-pre-jar" if="do.archive" name="-do-jar-without-manifest" unless="manifest.available">
<j2seproject1:jar/>
</target>
<target depends="init,compile,-pre-pre-jar,-pre-jar" if="do.archive+manifest.available" name="-do-jar-with-manifest" unless="manifest.available+main.class">
<j2seproject1:jar manifest="${manifest.file}"/>
</target>
<target depends="init,compile,-pre-pre-jar,-pre-jar" if="do.archive+manifest.available+main.class" name="-do-jar-with-mainclass" unless="manifest.available+main.class+mkdist.available">
<j2seproject1:jar manifest="${manifest.file}">
<j2seproject1:manifest>
<j2seproject1:attribute name="Main-Class" value="${main.class}"/>
</j2seproject1:manifest>
</j2seproject1:jar>
<echo>To run this application from the command line without Ant, try:</echo>
<property location="${build.classes.dir}" name="build.classes.dir.resolved"/>
<property location="${dist.jar}" name="dist.jar.resolved"/>
<pathconvert property="run.classpath.with.dist.jar">
<path path="${run.classpath}"/>
<map from="${build.classes.dir.resolved}" to="${dist.jar.resolved}"/>
</pathconvert>
<echo>java -cp "${run.classpath.with.dist.jar}" ${main.class}</echo>
</target>
<target depends="init,compile,-pre-pre-jar,-pre-jar,-init-macrodef-copylibs" if="do.archive+manifest.available+main.class+mkdist.available+splashscreen.available" name="-do-jar-with-libraries-and-splashscreen">
<basename file="${application.splash}" property="splashscreen.basename"/>
<mkdir dir="${build.classes.dir}/META-INF"/>
<copy failonerror="false" file="${application.splash}" todir="${build.classes.dir}/META-INF"/>
<j2seproject3:copylibs>
<customize>
<attribute name="Main-Class" value="${main.class}"/>
<attribute name="SplashScreen-Image" value="META-INF/${splashscreen.basename}"/>
</customize>
</j2seproject3:copylibs>
<echo>To run this application from the command line without Ant, try:</echo>
<property location="${dist.jar}" name="dist.jar.resolved"/>
<echo>java -jar "${dist.jar.resolved}"</echo>
</target>
<target depends="init,compile,-pre-pre-jar,-pre-jar,-init-macrodef-copylibs" if="do.archive+manifest.available+main.class+mkdist.available" name="-do-jar-with-libraries" unless="splashscreen.available">
<j2seproject3:copylibs>
<customize>
<attribute name="Main-Class" value="${main.class}"/>
</customize>
</j2seproject3:copylibs>
<echo>To run this application from the command line without Ant, try:</echo>
<property location="${dist.jar}" name="dist.jar.resolved"/>
<echo>java -jar "${dist.jar.resolved}"</echo>
</target>
<target name="-post-jar">
<!-- Empty placeholder for easier customization. -->
<!-- You can override this target in the ../build.xml file. -->
</target>
<target depends="init,compile,-pre-jar,-do-jar-with-manifest,-do-jar-without-manifest,-do-jar-with-mainclass,-do-jar-with-libraries-and-splashscreen,-do-jar-with-libraries,-post-jar" description="Build JAR." name="jar"/>
<!--
=================
EXECUTION SECTION
=================
-->
<target depends="init,compile" description="Run a main class." name="run">
<j2seproject1:java>
<customize>
<arg line="${application.args}"/>
</customize>
</j2seproject1:java>
</target>
<target name="-do-not-recompile">
<property name="javac.includes.binary" value=""/>
</target>
<target depends="init,compile-single" name="run-single">
<fail unless="run.class">Must select one file in the IDE or set run.class</fail>
<j2seproject1:java classname="${run.class}"/>
</target>
<target depends="init,compile-test-single" name="run-test-with-main">
<fail unless="run.class">Must select one file in the IDE or set run.class</fail>
<j2seproject1:java classname="${run.class}" classpath="${run.test.classpath}"/>
</target>
<!--
=================
DEBUGGING SECTION
=================
-->
<target depends="init" if="netbeans.home" name="-debug-start-debugger">
<j2seproject1:nbjpdastart name="${debug.class}"/>
</target>
<target depends="init" if="netbeans.home" name="-debug-start-debugger-main-test">
<j2seproject1:nbjpdastart classpath="${debug.test.classpath}" name="${debug.class}"/>
</target>
<target depends="init,compile" name="-debug-start-debuggee">
<j2seproject3:debug>
<customize>
<arg line="${application.args}"/>
</customize>
</j2seproject3:debug>
</target>
<target depends="init,compile,-debug-start-debugger,-debug-start-debuggee" description="Debug project in IDE." if="netbeans.home" name="debug"/>
<target depends="init" if="netbeans.home" name="-debug-start-debugger-stepinto">
<j2seproject1:nbjpdastart stopclassname="${main.class}"/>
</target>
<target depends="init,compile,-debug-start-debugger-stepinto,-debug-start-debuggee" if="netbeans.home" name="debug-stepinto"/>
<target depends="init,compile-single" if="netbeans.home" name="-debug-start-debuggee-single">
<fail unless="debug.class">Must select one file in the IDE or set debug.class</fail>
<j2seproject3:debug classname="${debug.class}"/>
</target>
<target depends="init,compile-single,-debug-start-debugger,-debug-start-debuggee-single" if="netbeans.home" name="debug-single"/>
<target depends="init,compile-test-single" if="netbeans.home" name="-debug-start-debuggee-main-test">
<fail unless="debug.class">Must select one file in the IDE or set debug.class</fail>
<j2seproject3:debug classname="${debug.class}" classpath="${debug.test.classpath}"/>
</target>
<target depends="init,compile-test-single,-debug-start-debugger-main-test,-debug-start-debuggee-main-test" if="netbeans.home" name="debug-test-with-main"/>
<target depends="init" name="-pre-debug-fix">
<fail unless="fix.includes">Must set fix.includes</fail>
<property name="javac.includes" value="${fix.includes}.java"/>
</target>
<target depends="init,-pre-debug-fix,compile-single" if="netbeans.home" name="-do-debug-fix">
<j2seproject1:nbjpdareload/>
</target>
<target depends="init,-pre-debug-fix,-do-debug-fix" if="netbeans.home" name="debug-fix"/>
<!--
===============
JAVADOC SECTION
===============
-->
<target depends="init" if="have.sources" name="-javadoc-build">
<mkdir dir="${dist.javadoc.dir}"/>
<javadoc additionalparam="${javadoc.additionalparam}" author="${javadoc.author}" charset="UTF-8" destdir="${dist.javadoc.dir}" docencoding="UTF-8" encoding="${javadoc.encoding.used}" failonerror="true" noindex="${javadoc.noindex}" nonavbar="${javadoc.nonavbar}" notree="${javadoc.notree}" private="${javadoc.private}" source="${javac.source}" splitindex="${javadoc.splitindex}" use="${javadoc.use}" useexternalfile="true" version="${javadoc.version}" windowtitle="${javadoc.windowtitle}">
<classpath>
<path path="${javac.classpath}"/>
</classpath>
<fileset dir="${src.dir}" excludes="${excludes}" includes="${includes}">
<filename name="**/*.java"/>
</fileset>
<fileset dir="${build.generated.sources.dir}" erroronmissingdir="false">
<include name="**/*.java"/>
</fileset>
</javadoc>
</target>
<target depends="init,-javadoc-build" if="netbeans.home" name="-javadoc-browse" unless="no.javadoc.preview">
<nbbrowse file="${dist.javadoc.dir}/index.html"/>
</target>
<target depends="init,-javadoc-build,-javadoc-browse" description="Build Javadoc." name="javadoc"/>
<!--
=========================
JUNIT COMPILATION SECTION
=========================
-->
<target depends="init,compile" if="have.tests" name="-pre-pre-compile-test">
<mkdir dir="${build.test.classes.dir}"/>
</target>
<target name="-pre-compile-test">
<!-- Empty placeholder for easier customization. -->
<!-- You can override this target in the ../build.xml file. -->
</target>
<target if="do.depend.true" name="-compile-test-depend">
<j2seproject3:depend classpath="${javac.test.classpath}" destdir="${build.test.classes.dir}" srcdir="${test.src.dir}"/>
</target>
<target depends="init,compile,-pre-pre-compile-test,-pre-compile-test,-compile-test-depend" if="have.tests" name="-do-compile-test">
<j2seproject3:javac apgeneratedsrcdir="${build.test.classes.dir}" classpath="${javac.test.classpath}" debug="true" destdir="${build.test.classes.dir}" processorpath="${javac.test.processorpath}" srcdir="${test.src.dir}"/>
<copy todir="${build.test.classes.dir}">
<fileset dir="${test.src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/>
</copy>
</target>
<target name="-post-compile-test">
<!-- Empty placeholder for easier customization. -->
<!-- You can override this target in the ../build.xml file. -->
</target>
<target depends="init,compile,-pre-pre-compile-test,-pre-compile-test,-do-compile-test,-post-compile-test" name="compile-test"/>
<target name="-pre-compile-test-single">
<!-- Empty placeholder for easier customization. -->
<!-- You can override this target in the ../build.xml file. -->
</target>
<target depends="init,compile,-pre-pre-compile-test,-pre-compile-test-single" if="have.tests" name="-do-compile-test-single">
<fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>
<j2seproject3:force-recompile destdir="${build.test.classes.dir}"/>
<j2seproject3:javac apgeneratedsrcdir="${build.test.classes.dir}" classpath="${javac.test.classpath}" debug="true" destdir="${build.test.classes.dir}" excludes="" includes="${javac.includes}" processorpath="${javac.test.processorpath}" sourcepath="${test.src.dir}" srcdir="${test.src.dir}"/>
<copy todir="${build.test.classes.dir}">
<fileset dir="${test.src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/>
</copy>
</target>
<target name="-post-compile-test-single">
<!-- Empty placeholder for easier customization. -->
<!-- You can override this target in the ../build.xml file. -->
</target>
<target depends="init,compile,-pre-pre-compile-test,-pre-compile-test-single,-do-compile-test-single,-post-compile-test-single" name="compile-test-single"/>
<!--
=======================
JUNIT EXECUTION SECTION
=======================
-->
<target depends="init" if="have.tests" name="-pre-test-run">
<mkdir dir="${build.test.results.dir}"/>
</target>
<target depends="init,compile-test,-pre-test-run" if="have.tests" name="-do-test-run">
<j2seproject3:junit testincludes="**/*Test.java"/>
</target>
<target depends="init,compile-test,-pre-test-run,-do-test-run" if="have.tests" name="-post-test-run">
<fail if="tests.failed" unless="ignore.failing.tests">Some tests failed; see details above.</fail>
</target>
<target depends="init" if="have.tests" name="test-report"/>
<target depends="init" if="netbeans.home+have.tests" name="-test-browse"/>
<target depends="init,compile-test,-pre-test-run,-do-test-run,test-report,-post-test-run,-test-browse" description="Run unit tests." name="test"/>
<target depends="init" if="have.tests" name="-pre-test-run-single">
<mkdir dir="${build.test.results.dir}"/>
</target>
<target depends="init,compile-test-single,-pre-test-run-single" if="have.tests" name="-do-test-run-single">
<fail unless="test.includes">Must select some files in the IDE or set test.includes</fail>
<j2seproject3:junit excludes="" includes="${test.includes}"/>
</target>
<target depends="init,compile-test-single,-pre-test-run-single,-do-test-run-single" if="have.tests" name="-post-test-run-single">
<fail if="tests.failed" unless="ignore.failing.tests">Some tests failed; see details above.</fail>
</target>
<target depends="init,compile-test-single,-pre-test-run-single,-do-test-run-single,-post-test-run-single" description="Run single unit test." name="test-single"/>
<!--
=======================
JUNIT DEBUGGING SECTION
=======================
-->
<target depends="init,compile-test" if="have.tests" name="-debug-start-debuggee-test">
<fail unless="test.class">Must select one file in the IDE or set test.class</fail>
<property location="${build.test.results.dir}/TEST-${test.class}.xml" name="test.report.file"/>
<delete file="${test.report.file}"/>
<mkdir dir="${build.test.results.dir}"/>
<j2seproject3:debug classname="org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner" classpath="${ant.home}/lib/ant.jar:${ant.home}/lib/ant-junit.jar:${debug.test.classpath}">
<customize>
<syspropertyset>
<propertyref prefix="test-sys-prop."/>
<mapper from="test-sys-prop.*" to="*" type="glob"/>
</syspropertyset>
<arg value="${test.class}"/>
<arg value="showoutput=true"/>
<arg value="formatter=org.apache.tools.ant.taskdefs.optional.junit.BriefJUnitResultFormatter"/>
<arg value="formatter=org.apache.tools.ant.taskdefs.optional.junit.XMLJUnitResultFormatter,${test.report.file}"/>
</customize>
</j2seproject3:debug>
</target>
<target depends="init,compile-test" if="netbeans.home+have.tests" name="-debug-start-debugger-test">
<j2seproject1:nbjpdastart classpath="${debug.test.classpath}" name="${test.class}"/>
</target>
<target depends="init,compile-test-single,-debug-start-debugger-test,-debug-start-debuggee-test" name="debug-test"/>
<target depends="init,-pre-debug-fix,compile-test-single" if="netbeans.home" name="-do-debug-fix-test">
<j2seproject1:nbjpdareload dir="${build.test.classes.dir}"/>
</target>
<target depends="init,-pre-debug-fix,-do-debug-fix-test" if="netbeans.home" name="debug-fix-test"/>
<!--
=========================
APPLET EXECUTION SECTION
=========================
-->
<target depends="init,compile-single" name="run-applet">
<fail unless="applet.url">Must select one file in the IDE or set applet.url</fail>
<j2seproject1:java classname="sun.applet.AppletViewer">
<customize>
<arg value="${applet.url}"/>
</customize>
</j2seproject1:java>
</target>
<!--
=========================
APPLET DEBUGGING SECTION
=========================
-->
<target depends="init,compile-single" if="netbeans.home" name="-debug-start-debuggee-applet">
<fail unless="applet.url">Must select one file in the IDE or set applet.url</fail>
<j2seproject3:debug classname="sun.applet.AppletViewer">
<customize>
<arg value="${applet.url}"/>
</customize>
</j2seproject3:debug>
</target>
<target depends="init,compile-single,-debug-start-debugger,-debug-start-debuggee-applet" if="netbeans.home" name="debug-applet"/>
<!--
===============
CLEANUP SECTION
===============
-->
<target name="-deps-clean-init" unless="built-clean.properties">
<property location="${build.dir}/built-clean.properties" name="built-clean.properties"/>
<delete file="${built-clean.properties}" quiet="true"/>
</target>
<target if="already.built.clean.${basedir}" name="-warn-already-built-clean">
<echo level="warn" message="Cycle detected: JGrow was already built"/>
</target>
<target depends="init,-deps-clean-init" name="deps-clean" unless="no.deps">
<mkdir dir="${build.dir}"/>
<touch file="${built-clean.properties}" verbose="false"/>
<property file="${built-clean.properties}" prefix="already.built.clean."/>
<antcall target="-warn-already-built-clean"/>
<propertyfile file="${built-clean.properties}">
<entry key="${basedir}" value=""/>
</propertyfile>
</target>
<target depends="init" name="-do-clean">
<delete dir="${build.dir}"/>
<delete dir="${dist.dir}" followsymlinks="false" includeemptydirs="true"/>
</target>
<target name="-post-clean">
<!-- Empty placeholder for easier customization. -->
<!-- You can override this target in the ../build.xml file. -->
</target>
<target depends="init,deps-clean,-do-clean,-post-clean" description="Clean build products." name="clean"/>
<target name="-check-call-dep">
<property file="${call.built.properties}" prefix="already.built."/>
<condition property="should.call.dep">
<not>
<isset property="already.built.${call.subproject}"/>
</not>
</condition>
</target>
<target depends="-check-call-dep" if="should.call.dep" name="-maybe-call-dep">
<ant antfile="${call.script}" inheritall="false" target="${call.target}">
<propertyset>
<propertyref prefix="transfer."/>
<mapper from="transfer.*" to="*" type="glob"/>
</propertyset>
</ant>
</target>
</project>