/*
* Copyright 2005 Perforce Software. All rights reserved.
*
*/
/*
* unicvt.cc - Character set conversion code between unicode encodings
* which are never needed inside the p4d server. In a
* seporate file to keep server size low.
*/
#include <stdhdrs.h>
#include <strbuf.h>
#include "i18napi.h"
#include "charcvt.h"
#include "charman.h"
#include "validate.h"
CharSetCvtUTF8UTF8::CharSetCvtUTF8UTF8( int dir, int f )
: validator( NULL ), flags( f )
{
// do not validate from the server
if( ( direction = dir ) == -1 && ( flags & UTF8_VALID_CHECK ) )
validator = new CharSetUTF8Valid;
}
CharSetCvtUTF8UTF8::~CharSetCvtUTF8UTF8()
{
delete validator;
}
/*
* direction controls BOM prepending
*
* 0 means never prepend BOM
* 1 means prepend BOM
* -1 means only prepend BOM in the reverse direction
*
* This allows us to always eliminate the BOM when going into the
* server while prepending the BOM when going to the client
* and still use the same code to always suppress a BOM
*/
CharSetCvt *
CharSetCvtUTF8UTF8::Clone()
{
return new CharSetCvtUTF8UTF8( direction, flags );
}
CharSetCvt *
CharSetCvtUTF8UTF8::ReverseCvt()
{
return new CharSetCvtUTF8UTF8( -direction, flags );
}
int
CharSetCvtUTF8UTF8::Cvt(const char **sourcestart, const char *sourceend,
char **targetstart, char *targetend)
{
int slen = sourceend - *sourcestart;
int tlen = targetend - *targetstart;
if( checkBOM && slen >= 1 && (**sourcestart & 0xff) == 0xef )
{
if( slen < 3 )
{
lasterr = PARTIALCHAR;
return 0;
}
if( ((*sourcestart)[1] & 0xff) == 0xbb &&
((*sourcestart)[2] & 0xff) == 0xbf )
{
*sourcestart += 3;
slen -= 3;
}
}
if( checkBOM && ( flags & UTF8_WRITE_BOM ) && direction == 1 )
{
// write a BOM to target
if( tlen < 3 )
{
lasterr = PARTIALCHAR;
return 0;
}
**targetstart = 0xef;
*++*targetstart = 0xbb;
*++*targetstart = 0xbf;
++*targetstart;
tlen -= 3;
}
checkBOM = 0;
if( tlen < slen )
slen = tlen;
if( validator )
{
const char *ep, *sp;
sp = (const char *)*sourcestart;
switch ( validator->Valid( sp, slen, &ep ) )
{
case 0:
// eventually not valid
lasterr = NOMAPPING;
slen = ep - sp;
validator->Reset();
break;
case 3:
// valid to a partial char
lasterr = PARTIALCHAR;
slen = ep - sp;
validator->Reset();
break;
case 1:
// valid, do nothing
break;
}
// sigh... need to count newlines...
while ( sp < ep )
{
if ( !( sp = (const char *)memchr( sp, '\n', ep - sp ) ) )
break;
++linecnt;
++sp;
}
}
memcpy( (void *)*targetstart, (void *)*sourcestart, slen );
*sourcestart += slen;
*targetstart += slen;
return 0;
}
CharSetCvt *
CharSetCvtUTF832::Clone()
{
return new CharSetCvtUTF832( invert, bom );
}
CharSetCvt *
CharSetCvtUTF328::Clone()
{
return new CharSetCvtUTF328( invert, bom );
}
CharSetCvt *
CharSetCvtUTF832::ReverseCvt()
{
return new CharSetCvtUTF328( invert, bom );
}
CharSetCvt *
CharSetCvtUTF328::ReverseCvt()
{
return new CharSetCvtUTF832( invert, bom );
}
int
CharSetCvtUTF832::Cvt(const char **sourcestart, const char *sourceend,
char **targetstart, char *targetend)
{
unsigned int v;
if( checkBOM && bom )
{
if( 4+*targetstart >= targetend )
{
lasterr = PARTIALCHAR;
return 0;
}
if( fileinvert )
{
**targetstart = 0xff;
*++*targetstart = 0xfe;
*++*targetstart = 0;
*++*targetstart = 0;
}
else
{
**targetstart = 0;
*++*targetstart = 0;
*++*targetstart = 0xfe;
*++*targetstart = 0xff;
}
++*targetstart;
}
while( *sourcestart < sourceend && *targetstart < targetend - 1 )
{
v = **sourcestart & 0xff;
int l;
if ( v & 0x80 )
{
l = bytesFromUTF8[v];
if ( l + *sourcestart >= sourceend )
{
lasterr = PARTIALCHAR;
return 0;
}
switch( l )
{
default:
lasterr = NOMAPPING;
return 0;
case 3:
// surrogates are needed - check for more target space
if( *targetstart > targetend - 4 )
{
lasterr = PARTIALCHAR;
return 0;
}
v <<= 6;
v += 0xff & *++*sourcestart;
// fall through...
case 2:
v <<= 6;
v += 0xff & *++*sourcestart;
// fall through...
case 1:
v <<= 6;
v += 0xff & *++*sourcestart;
v -= offsetsFromUTF8[l];
# ifdef STRICT_UTF8
if( v < minimumFromUTF8[l] )
{
// illegal over long UTF8 sequence
lasterr = NOMAPPING;
*sourcestart -= l;
return 0;
}
#endif
// at this point v is a unicode position
if( checkBOM && v == 0xfeff )
{
checkBOM = 0;
++*sourcestart;
continue;
}
// note fall through
}
}
checkBOM = 0;
# ifdef STRICT_UTF8
// check for invalid unicode positions
if( ( v & 0x1ff800 ) == 0xd800 || ( v >= 0xfdd0 && v <= 0xfdef ) )
{
lasterr = NOMAPPING;
*sourcestart -= l;
return 0;
}
# endif
++charcnt;
if( v == '\n' ) {
++linecnt;
charcnt = 0;
}
if( fileinvert )
{
**targetstart = v & 0xff;
*++*targetstart = (v >> 8) & 0xff;
*++*targetstart = (v >> 16) & 0xff;
*++*targetstart = (v >> 24) & 0xff;
}
else
{
**targetstart = (v >> 24) & 0xff;
*++*targetstart = (v >> 16) & 0xff;
*++*targetstart = (v >> 8) & 0xff;
*++*targetstart = v & 0xff;
}
++*targetstart;
++*sourcestart;
}
if( *sourcestart < sourceend && *targetstart < targetend )
lasterr = PARTIALCHAR;
return 0;
}
int
CharSetCvtUTF328::Cvt(const char **sourcestart, const char *sourceend,
char **targetstart, char *targetend)
{
unsigned int v;
while( 3+*sourcestart < sourceend && *targetstart < targetend )
{
if( fileinvert )
{
v = **sourcestart & 0xff;
v |= (*++*sourcestart & 0xff) << 8;
v |= (*++*sourcestart & 0xff) << 16;
v |= (*++*sourcestart & 0xff) << 24;
}
else
{
v = (**sourcestart & 0xff) << 24;
v |= (*++*sourcestart & 0xff) << 16;
v |= (*++*sourcestart & 0xff) << 8;
v |= *++*sourcestart & 0xff;
}
++*sourcestart;
if( checkBOM )
{
checkBOM = 0;
switch( v )
{
case 0xfffe0000:
fileinvert ^= 1;
// fall through...
case 0xfeff:
// suppress BOM
continue;
}
}
// emit UTF8 of v
if( ( v & 0x1ff800 ) == 0xd800 || ( v >= 0xfdd0 && v <= 0xfdef ) )
{
lasterr = NOMAPPING;
*sourcestart -= 2;
if( v >= 0x10000 )
*sourcestart -= 2;
return 0;
}
if( v >= 0x10000 )
{
// Extended multilingual plane - 4 byte UTF8
if (3 + *targetstart >= targetend)
{
lasterr = PARTIALCHAR;
*sourcestart -= 4; // 4 because of UTF 16 surrogates
return 0;
}
**targetstart = 0xf0 | (v >> 18);
*++*targetstart = 0x80 | ((v >> 12) & 0x3f);
*++*targetstart = 0x80 | ((v >> 6) & 0x3f);
*++*targetstart = 0x80 | (v & 0x3f);
}
else if( v >= 0x800 )
{
if (2 + *targetstart >= targetend)
{
lasterr = PARTIALCHAR;
*sourcestart -= 2;
return 0;
}
**targetstart = 0xe0 | (v >> 12);
*++*targetstart = 0x80 | ((v >> 6) & 0x3f);
*++*targetstart = 0x80 | (v & 0x3f);
}
else if( v >= 0x80 )
{
if (1 + *targetstart >= targetend)
{
lasterr = PARTIALCHAR;
*sourcestart -= 2;
return 0;
}
**targetstart = 0xc0 | (v >> 6);
*++*targetstart = 0x80 | (v & 0x3f);
}
else
**targetstart = v;
++*targetstart;
}
if( *sourcestart < sourceend && *targetstart < targetend )
lasterr = PARTIALCHAR;
++charcnt;
if( v == '\n' ) {
++linecnt;
charcnt = 0;
}
return 0;
}
# |
Change |
User |
Description |
Committed |
|
#1
|
21040 |
rlranft |
Update my branches from latest |
|
|
//guest/perforce_software/p4/2016-1/i18n/unicvt.cc |
#1
|
19472 |
Liz Lam |
Initial add of the 2016.1 p4/p4api source code. |
|
|