c4.1 #1

.\"	C4 -- CVS like front end to the Perforce p4 SCM tool.
.\"
.\" Copyright (c) 1997 - 1999, Neil Russell.  All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. All advertising materials mentioning features or use of this software
.\"    must display the following acknowledgement:
.\"      This product includes software developed by Neil Russell.
.\" 4. The name Neil Russell may not be used to endorse or promote products
.\"    derived from this software without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY NEIL RUSSELL ``AS IS'' AND ANY EXPRESS OR
.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
.\" WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
.\" DISCLAIMED.  IN NO EVENT SHALL NEIL RUSSELL BE LIABLE FOR ANY DIRECT,
.\" INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
.\" (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
.\" SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
.\" STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
.\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
.\" POSSIBILITY OF SUCH DAMAGE.
.\"
.TH C4 1 1.6
.SH NAME
c4 \(em CVS like front end to the Perforce SCM system
.SH SYNOPSIS
.B c4
.IR p4\-command " .\|.\|."
.br
.B c4
.B update|scan|import
[
.B \-acdnvxD
] 
.SH DESCRIPTION
.B C4
provides a CVS like
.I feel
to Perforce's SCM system
.BR p4 .
.B C4
is not a substitute for CVS, in that it does not try to mimic
CVS's command set.
.LP
Like CVS, every file in a user's work-space
.RI ( client )
is writable, and can be modified on an ad hoc basis.
.B C4
provides commands that search a client, looking for files that have
been changed, and runs a "\fIp4 edit\fP" command on them.
Any files that are currently opened for edit, and are no longer
different than their repository (\fIdepot\fP) version,
a "\fIp4 revert\fP" command is run on them.
Files that are missing from the client are refreshed ("\fIp4 refresh\fP").
Files that exist in the client that have no matching depot version
are reported, to remind the user to add them, and can optionally be
added automatically.
Files that are out of date with respect to the depot are updated
("\fIp4 get\fP").
.LP
.B C4
also provides support for clients without the use of
environment variables.
Each time
.B c4
is executed, it searches for a "\fB.c4\fP" file,
and incorporates its contents into the environment of any \fIp4\fP
command that it invokes.
The "\fB.c4\fP" file is usually kept in the root directory of a client.
.LP
.B C4
should be used with Perforce version 97.3 or later.
.B C4
will work with older versions, but files will not remain writable,
reducing the usefulness of \fBc4\fP.
.SH "CLIENT CREATION"
Making a new client for use with
.B c4
is slightly different than when using
.B p4
directly.
Here are the steps that should be followed:
.IP 1. 0.3i
Create a client directory.
.IP 2.
Create a file called "\fB.c4\fP" in the client directory with
the following contents:
.RS
.RS
P4PORT=\fI<p4 server port address>\fP
.br
P4CLIENT=\fI<client name>\fP
.RE
.RE
.IP 3.
Change directory to the client directory, and
run the command "\fBc4\ client\fP" to create the Perforce client.
Set up the client as usual.
Modify the "\fBOptions\fP" line to enable "\fBclobber\fP"
and add the option
.nh
"\fBallwrite\fP".
.hy
For example:
.RS
.RS
Options:   nomodtime clobber allwrite
.RE
.RE
.IP 4.
Populate the client with the command "\fBc4\ update\fP".
Note that "\fBc4\ update\fP" should be used in preference to "\fBc4\ get\fP";
with the \fIclobber\fP flag set, a modified file may be overwritten,
destroying any changes made to it locally.
.SH COMMANDS
If \fBc4\fP doesn't recognize a command, it just passes the command
and the remaining arguments to \fBp4\fP,
after incorporating the contents of the "\fB.c4\fP" file into the environment.
If \fBc4\fP recognizes the command, it is executed locally,
usually invoking several \fBp4\fP commands.
.B C4
adds three new commands:
.TP 0.3i
\fBc4\ update\fP
"\fBc4\ update\fP" resembles the CVS \fIupdate\fP command.
It performs the following actions:
.RS
.IP 1. 0.3i
Recursively scan the current directory and any sub-directories,
gathering information about files, including whether the file has been
modified with respect to its depot version.
.IP 2.
Report any files that are unknown, to remind the user that they
should be added.
This step can be omitted with the \fB\-x\fP option.
Files which are \fIignored\fP are not reported
(see the section
.nh
"IGNORING FILES"
.hy
below).
.IP 3.
Files that are not opened and are different than their respective
depot versions are opened with a "\fBp4\ edit\fP" command.
Files that are opened and are now the same as their respective depot
version are reverted with a "\fBp4\ revert\fP" command.
Files that are missing from the client are refreshed with a
"\fBp4\ refresh\fP" command.
.IP 4.
Files that are out of date with respect to the depot are retrieved
with the command "\fBp4\ get\fP".
.RE
.IP
Note that a "\fBc4\ update\fP" can never overwrite a file because a
modified file is always opened for edit with a "\fBp4\ edit\fP"
command before it is retrieved with a "\fBp4\ get\fP" command.
If a modified file is out of date, then the user will need to
resolve the differences with a "\fBc4\ resolve\fP" command before
submitting.
.TP
\fBc4\ scan\fP
"\fBc4\ scan\fP" is the same as a "\fBc4\ update\fP,
but it does not update out of date files ("\fBp4\ get\fP").
.TP
\fBc4\ import\fP
"\fBc4\ import\fP" is used to import or re-import whole
source trees into Perforce.
.B C4
will figure out all changes that have happened in the source
tree and issue "\fBp4\ add\fP", "\fBp4\ edit\fP" and "\fBp4\ delete\fP"
commands as appropriate.
Apart from files that are added, modified or deleted,
.B c4 
can also handle files that have changed type \(em
a file that was a regular file that is now a directory or symbolic link,
or any other combination of change.
.IP
The general procedure for import is:
.RS
.IP 1. 0.3i
Make sure that the tree is up-to-date by doing a
"\fBc4\ update\fP" or a "\fBc4\ sync\ ...\fP".
This is obviously not necessary if this is a new tree.
.IP 2.
Replace the tree with the new tree.
This almost always means that you should remove the old tree and
copy in the new tree,
ensuring that files that no longer exist get deleted.
.IP 3.
Change directory to the root of the tree and run
"\fBc4\ import\fP".
This will issue add, edit and delete operations as appropriate.
.IP 4.
Submit the resulting changes ("\fBc4\ submit\fP").
.RE
.IP
Import can be used when moving source from another source control
system to Perforce.
A lump of source that can be identified as a single change is extracted
from the other source control system and submitted using the above
procedure.
The date of the change can even be set correctly by using the
"\fBp4\ change -f\fP" command after the submit.
.SH ".C4 FILE FORMAT"
Each time
.B c4
is executed, it searches for a "\fB.c4\fP" file,
and incorporates its contents into the environment of any \fIp4\fP
command that it invokes.
The "\fB.c4\fP" file is usually kept in the root directory of a client.
If a "\fB.c4\fP" file is not found, then the correct \fBp4\fP
environment variables must be set (usually \fBP4PORT\fP and \fBP4CLIENT\fP).
.LP
Every line that begins with an alphabetic character
(`A' \- `Z' or `a' \- `z'),
and contains an `\fB=\fP' is added to the environment.
Every line that begins with a `\fB:\fP' is used as an ignore specification
(see the section
.nh
"IGNORING FILES"
.hy
below).
Every line that starts with a `\fB#\fP' character,
is empty,
or contains only spaces is ignored.
All other lines are currently ignored, but may not be in
future versions of \fBc4\fP.
.SH "IGNORING FILES"
While scanning, if files are found that are not known to the depot,
they are examined to see if they should be ignored.
This is done by matching the
basename (the last name component) of the file to the ignore list for
the current directory and the global ignore list.
The ignore list for each directory is stored in a file called
"\fB.c4ignore\fP" in that directory.
The global ignore list is compiled into
.BR c4 ,
and can be modified or replaced by entries in the \fB.c4\fP file.
Directories are matched with ignore lists, allowing whole
directories to be ignored.
.LP
Lines beginning with `\fB:\fP' in the \fB.c4\fP file are considered
ignore specifications.
An ignore specification is a globbing string as used by the shell;
a file will be ignored if it matches any entry in an ignore list.
A `\fB:\fP' on a line by itself
will cause the entire ignore list to be deleted;
this is generally used to clear the global list and replace it
with new entries.
.LP
The default compiled in global ignore list contains the following:
.RS
*.o, *.a, *.Z, *.gz, .c4, tags, TAGS, core.
.RE
.LP
Here is an example \fB.c4\fP file that defines typical environment
variables and replaces the builtin ignore list with another:
.RS
P4PORT=bigsun:1666
.br
P4CLIENT=myclient
.br
:
.br
:*.bz2
.br
:*.[is]
.br
:x.*
.br
:core
.RE
.SH "PERFORCE SUPPORT"
.B C4
uses two as yet undocumented features included in 97.3 and later
releases of
.BR p4 :
.IP allwrite 0.3i
The \fIallwrite\fP client option always creates files that are writable
in the client.
While
.B c4
does not rely on this, much of its usefulness is diminished without it.
.IP "diff -sc"
"\fBc4\ diff\ -sc\fP" combines the effect of "\fBc4\ diff\ -sa\fP"
and "\fBc4\ diff\ -se\fP", to improve the performance of scanning
for changed files.
.B C4
will only use this feature on versions 97.3 and later.
[Note: In the 97.3 release, this feature did not work correctly, so
.B c4
does not use it.
It was later discovered that this feature would not
significantly increase the performance of \fBc4\fP.]
.SH INSTALLATION
.B C4
is a single executable that is usually stored in the same place as
the \fBp4\fP client executable.
.B C4
may be configured as a replacement front end for \fBp4\fP
by creating a shell script called \fBp4\fP, which contains the following:
.RS
#!/bin/sh
.br
export P4COMMAND=\fI<name of real p4 command>\fP
.br
c4 "$@"
.RE
.SH OPTIONS
When one of the local
.B c4
commands is invoked, the following options may be used to modify
its behavior:
.IP \-a 0.4i
Force automatic add.
When used with "\fBc4\ update\fP" or "\fBc4\ scan\fP",
unknown files will be added rather than just reported.
.IP \-c
Canonical update processing.
.B C4
will run commands necessary to change the depot to reflect the
current client, regardless of the changes.
[Depreciated; use "\fBc4\ import\fP".]
.IP \-d
Force automatic delete.
When a file is missing in the client, it will be deleted from the depot,
rather than refreshed.
.IP \-n
Any commands that cause changes will not be executed.
When \fBc4\fP is invoked with the \-n and \-d options,
the user can see what will be executed for a given circumstance.
.IP \-v
Verbose.
Print more messages about what is happening.
This is useful when running \fBc4\fP at the root of a large
client directory structure; it will print the name of each
directory as it is scanned.
.IP \-x
Messages about unknown files usually reported by
"\fBc4\ update\fP" and "\fBc4\ scan\fP"
are suppressed.
.IP \-D
When given,
.B c4
prints diagnostic messages about what is going on
(used for debugging \fBc4\fP).
Multiple \-D options can be given to get more details.
.SH "SEE ALSO"
p4(1), "Perforce User Manual".
.SH BUGS
If you modify a file locally that has been changed in the depot,
then when you do a "\fBc4\ update\fP", you will get a merge conflict.
.B C4
runs a "\fBp4\ edit\fP" command followed by a "\fBp4\ get\fP" command
on the file, which will result in messages that may confuse some users;
.B c4
does the right thing though.
You will have to run a "\fBc4\ resolve\fP" to deal with the merge issues
before you can submit the file.
Do not run "\fBc4\ sync\fP" or "\fBc4\ get\fP" as the messages suggest.
.LP
With both "\fBclobber\fP" and "\fBallwrite\fP" options set on the client
(as they should be when using \fBc4\fP),
you should not use "\fBc4\ get\fP" to update files from the depot if
you have made local changes \(em your changes will be overwritten.
Use "\fBc4\ update\fP".
.LP
If you run \fBc4\fP in a directory that is empty in the depot,
such as a directory with only new files in it, you may see
messages like ".\|.\|. \- no such file(s)".
Don't worry about them.
.LP
When doing a "\fBc4\ import\fP",
the client must be up-to-date
with respect to the depot before changes are made to the client;
that is, there must not be files that must be synchronized in a directory
that no longer exists.
This is because the
.B p4
client command does not handle directories; if a directory is replaced
by a file or a symbolic link,
.B p4
can get confused and \fBc4\fP's import processing will fail.
.LP
When doing a "\fBc4\ import\fP",
changes between a regular file, directory or symbolic link
are handled, however, this functionality is not well tested.
This will no doubt be taken care of by the next release of \fBc4\fP.
.LP
The options provided by \fBc4\fP are not necessarily consistent with
each other.
This is a historical accident and may be rectified in the future.